B1855 Toyota Code - Short In Rear Side Squib Left Circuit
Quick Answer
The B1855 diagnostic trouble code for Toyota vehicles indicates a "Short In Rear Side Squib Left Circuit." This code specifically refers to an issue with the circuit that controls the deployment of the side airbag on the left side of the rear of the vehicle. Common causes include Wiring harness damage or short circuit, Faulty side airbag squib (inflator) module, Corrosion or poor connections in the circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1855 Toyota indicates Short In Rear Side Squib Left Circuit.
- Common causes
- Common causes include Wiring harness damage or short circuit, Faulty side airbag squib (inflator) module, Corrosion or poor connections in the circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1855 Toyota Description
The B1855 diagnostic trouble code for Toyota vehicles indicates a "Short In Rear Side Squib Left Circuit." This code specifically refers to an issue with the circuit that controls the deployment of the side airbag on the left side of the rear of the vehicle. The side airbag, also known as the side curtain airbag, is an important safety feature designed to protect occupants in the event of a side-impact collision.
Common Causes of B1855 Toyota
- Wiring harness damage or short circuit.
- Faulty side airbag squib (inflator) module.
- Corrosion or poor connections in the circuit.
- Impact or collision that damaged the side airbag system components.
- Manufacturing defect in the airbag system components.
Symptoms of B1855 Toyota
- Illumination of the airbag warning light on the dashboard.
- Inability to deploy the side airbag on the left side of the rear in a crash.
- Intermittent or erratic deployment of the side airbag.
- Loss of communication with the airbag control module.
- Vehicle may fail airbag deployment system self-test.
How to Fix B1855 Toyota
- Begin by diagnosing the specific cause of the short in the rear side squib left circuit using a diagnostic scanner to retrieve the trouble codes and pinpoint the issue.
- Inspect the wiring harness and connectors for any signs of damage, corrosion, or loose connections. Repair or replace any damaged components as needed.
- Test the side airbag squib module for proper functionality and replace it if necessary.
- Clear the trouble codes from the airbag control module and perform a system reset to ensure that the issue has been resolved.
- Conduct a thorough test of the side airbag system to verify that the repair was successful and that the airbag deploys as intended in a controlled environment.
Cost to Fix B1855 Toyota
The cost of repairing a short in the rear side squib left circuit can vary depending on the specific cause of the issue and the extent of the damage. In general, the cost of parts for this repair can range from $200 to $500, while labor costs typically range from $150 to $300. Overall, the total repair cost for addressing this code may fall between $350 and $800. It is important to note that these are rough estimates, and actual costs may vary based on factors such as the vehicle's make and model, the location of the repair shop, and the availability of parts. It is recommended to consult with a qualified mechanic or repair shop to obtain a more accurate cost estimate for addressing this issue.
Need more information about the B1855 Toyota code?
Need more information on how to fix the B1855 Toyota code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1855 Toyota code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1855 Toyota Code
1. What are the common symptoms of OBDII code B1855 Toyota (Short In Rear Side Squib Left Circuit)?
- Common symptoms include the airbag warning light staying illuminated on the dashboard and potential non-deployment of the airbag in the event of a collision.
2. What are the possible causes of OBDII code B1855 Toyota?
- The code B1855 indicates a short in the rear side squib left circuit, which can be caused by wiring issues, a faulty squib (airbag detonator), or a problem with the airbag control module.
3. How can I diagnose the source of the short in the rear side squib left circuit?
- Diagnosing the issue requires using a scan tool to retrieve the specific fault codes, inspecting the wiring harness for damage or corrosion, and testing the components in the airbag system.
4. Is it safe to drive with OBDII code B1855 Toyota present?
- It is not recommended to drive the vehicle with an active airbag fault code like B1855, as it may compromise the functionality of the airbag system in the event of a collision.
5. Can I reset the OBDII code B1855 Toyota on my own?
- While you can clear the code using an OBDII scanner, it is crucial to address the underlying issue causing the fault code to prevent potential safety risks.
6. How much does it typically cost to repair OBDII code B1855 Toyota?
- The cost of repair can vary depending on the specific cause of the fault, but it may involve replacing damaged wiring, the squib, or the airbag control module, and can range from a few hundred to over a thousand dollars.
7. Are there any safety precautions to consider when working on the airbag system related to code B1855?
- Always disconnect the vehicle's battery and wait for at least 10 minutes before working on the airbag system to avoid accidental deployment, and follow proper safety procedures outlined in the vehicle's service manual.
8. Can a DIY enthusiast repair OBDII code B1855 Toyota at home?
- Repairing airbag-related fault codes like B1855 requires specialized knowledge and tools, so it is recommended to seek professional assistance to ensure the job is done correctly and safely.
9. How long does it take to repair OBDII code B1855 Toyota?
- The repair time can vary depending on the extent of the issue and the availability of parts, but it typically takes a few hours to a full day to diagnose and fix the short in the rear side squib left circuit.
10. Will fixing OBDII code B1855 Toyota affect the vehicle's airbag system's functionality?
- Addressing the underlying cause of the fault code and repairing it properly should restore the airbag system's functionality and ensure it operates correctly in the event of an accident.
Discuss the causes and fixes for B1855 Toyota OBDII Code
Code B1855 Toyota comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.