B1847 Lexus Code - Short To Ground In Curtain Shield Squib Left 2nd Step Circuit
Quick Answer
The B1847 diagnostic trouble code for Lexus vehicles indicates a "Short To Ground In Curtain Shield Squib Left 2nd Step Circuit." This code specifically points to an issue with the left side curtain airbag system in the vehicle. Common causes include Damaged or frayed wiring in the curtain shield squib left 2nd step circuit, Corrosion or poor connections in the wiring harness related to the airbag system, Faulty curtain shield squib component. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1847 Lexus indicates Short To Ground In Curtain Shield Squib Left 2nd Step Circuit.
- Common causes
- Common causes include Damaged or frayed wiring in the curtain shield squib left 2nd step circuit, Corrosion or poor connections in the wiring harness related to the airbag system, Faulty curtain shield squib component.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1847 Lexus Description
The B1847 diagnostic trouble code for Lexus vehicles indicates a "Short To Ground In Curtain Shield Squib Left 2nd Step Circuit." This code specifically points to an issue with the left side curtain airbag system in the vehicle. The curtain shield squib is a component of the airbag system that helps deploy the curtain airbags in the event of a collision or impact. A short to ground in this circuit means that there is an unintended connection between the wiring of the squib and the vehicle's chassis or ground, which can prevent the airbag from deploying properly in an accident.
Common Causes of B1847 Lexus
- Damaged or frayed wiring in the curtain shield squib left 2nd step circuit.
- Corrosion or poor connections in the wiring harness related to the airbag system.
- Faulty curtain shield squib component.
- Impact or collision that caused damage to the left side curtain airbag system.
- Electrical issues or short circuits in the vehicle's wiring system.
Symptoms of B1847 Lexus
- Illumination of the airbag warning light on the dashboard.
- Inability to reset the airbag warning light after clearing the code.
- Lack of deployment or improper deployment of the left side curtain airbag in a crash test.
- Diagnostic trouble code B1847 stored in the vehicle's computer system.
How to Fix B1847 Lexus
- Begin by disconnecting the vehicle's battery to prevent accidental deployment of the airbags during repairs.
- Inspect the wiring harness and connections related to the curtain shield squib left 2nd step circuit for any damage, corrosion, or loose connections.
- Test the curtain shield squib component for proper functionality using a multimeter or diagnostic tool.
- Replace any damaged wiring, connectors, or the curtain shield squib component as needed.
- Clear the diagnostic trouble code from the vehicle's computer system and perform a test to ensure proper deployment of the left side curtain airbag.
Cost to Fix B1847 Lexus
The typical repair costs for addressing a short to ground in the curtain shield squib left 2nd step circuit can vary depending on the extent of the damage and the specific components that need to be replaced. In general, the cost of parts for this repair can range from $200 to $500, while labor costs can range from $150 to $300. Overall, the total repair cost for this issue may fall between $350 and $800. It's important to note that these estimates are approximate and actual costs may vary based on factors such as location, vehicle make and model, and the specific repair shop's rates. It's recommended to consult with a qualified mechanic or repair shop for a more accurate cost estimate based on the individual circumstances of the vehicle.
Need more information about the B1847 Lexus code?
Need more information on how to fix the B1847 Lexus code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1847 Lexus code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1847 Lexus Code
1. What are the common symptoms of OBDII code B1847 in a Lexus related to a short to ground in the curtain shield squib left 2nd step circuit?
- Common symptoms include the airbag warning light illuminating on the dashboard, potential non-deployment of the curtain airbag during a collision, and trouble codes stored in the vehicle's computer.
2. What are the possible causes of OBDII code B1847 in a Lexus indicating a short to ground in the curtain shield squib left 2nd step circuit?
- The code B1847 can be triggered by a short to ground in the curtain shield squib left 2nd step circuit, which may be caused by damaged wiring, a faulty curtain shield squib, or a problem with the airbag control module.
3. How can I diagnose the issue related to OBDII code B1847 in a Lexus with a short to ground in the curtain shield squib left 2nd step circuit?
- Diagnosing this issue typically involves inspecting the wiring harness for damage, checking the curtain shield squib for proper functionality, and using a diagnostic scanner to retrieve trouble codes stored in the system.
4. Is it safe to drive a Lexus with OBDII code B1847 indicating a short to ground in the curtain shield squib left 2nd step circuit?
- It is not recommended to drive the vehicle with an unresolved airbag system issue as it can affect the safety of the vehicle occupants in the event of a collision. Prompt repair is advised.
5. Can I repair OBDII code B1847 related to a short to ground in the curtain shield squib left 2nd step circuit in a Lexus myself?
- Repairing this issue may require specialized knowledge and tools. It is recommended to consult a professional technician or authorized Lexus service center to properly diagnose and repair the problem.
6. How much does it typically cost to repair OBDII code B1847 in a Lexus due to a short to ground in the curtain shield squib left 2nd step circuit?
- The cost of repair can vary depending on the exact cause of the issue, the extent of the damage, and labor rates. It is advisable to get a diagnosis from a qualified technician to determine the repair cost.
7. Will resetting the OBDII code B1847 related to a short to ground in the curtain shield squib left 2nd step circuit in a Lexus make the problem go away?
- Resetting the code may temporarily turn off the warning light, but it will not fix the underlying issue causing the fault. It is essential to address the root cause of the problem to ensure proper airbag system functionality.
8. What precautions should I take when working on the airbag system in a Lexus with OBDII code B1847 indicating a short to ground in the curtain shield squib left 2nd step circuit?
- When working on the airbag system, it is crucial to disconnect the vehicle's battery, follow proper safety procedures outlined in the service manual, and avoid mishandling airbag components to prevent accidental deployment.
9. Can a Lexus dealership or authorized service center provide a warranty on the repair for OBDII code B1847 related to a short to ground in the curtain shield squib left 2nd step circuit?
- Many authorized service centers or dealerships may offer a warranty on parts and labor for the repair of OBDII code B1847, but it is recommended to inquire about specific warranty terms before proceeding with the repair.
10. Are there any recalls or service bulletins related to OBDII code B1847 and the issue of a short to ground in the curtain shield squib left 2nd step circuit in Lexus vehicles?
- It is advisable to check with Lexus customer service or visit the National Highway Traffic Safety Administration (NHTSA) website to see if there are any recalls or service bulletins related to this specific OBDII code and issue in Lexus vehicles.
Discuss the causes and fixes for B1847 Lexus OBDII Code
Code B1847 Lexus comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.