B1840 2014 Chevrolet Silverado Code - Driver Seat Lumbar Up Switch Circuit
Quick Answer
The B1840 diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado relates to the Driver Seat Lumbar Up Switch Circuit. Common causes include Faulty lumbar support switch, Damaged wiring or connectors in the lumbar support circuit, Blown fuse related to the lumbar support system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1840 2014 Chevrolet Silverado indicates Driver Seat Lumbar Up Switch Circuit.
- Common causes
- Common causes include Faulty lumbar support switch, Damaged wiring or connectors in the lumbar support circuit, Blown fuse related to the lumbar support system.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1840 2014 Chevrolet Silverado Description
The B1840 diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado relates to the Driver Seat Lumbar Up Switch Circuit. This code indicates that there is a malfunction in the circuit responsible for controlling the lumbar support adjustment in the driver's seat. The lumbar support feature allows the driver to adjust the lower back support to their comfort level, promoting better posture and reducing fatigue during long drives.
Common Causes of B1840 2014 Chevrolet Silverado
- Faulty lumbar support switch.
- Damaged wiring or connectors in the lumbar support circuit.
- Blown fuse related to the lumbar support system.
- Issues with the lumbar support motor or mechanism.
- Electronic control module (ECM) malfunction.
Symptoms of B1840 2014 Chevrolet Silverado
- Inability to adjust the lumbar support in the driver's seat.
- Lumbar support adjustment working intermittently.
- Unresponsive or stuck lumbar support switch.
- Illumination of the airbag warning light on the dashboard.
How to Fix B1840 2014 Chevrolet Silverado
- Begin by inspecting the lumbar support switch for any visible damage or signs of wear. Replace the switch if necessary.
- Check the wiring and connectors in the lumbar support circuit for any breaks, corrosion, or loose connections. Repair or replace as needed.
- Test the fuse related to the lumbar support system using a multimeter. Replace any blown fuses.
- Verify the functionality of the lumbar support motor or mechanism. Replace if faulty.
- If all components check out, consider checking the ECM for any faults or reprogramming if necessary.
Cost to Fix B1840 2014 Chevrolet Silverado
The typical repair costs for addressing the B1840 code on a 2014 Chevrolet Silverado can vary depending on the specific cause of the issue. In general, the cost of parts such as a lumbar support switch, wiring, connectors, fuses, or a lumbar support motor can range from $50 to $200. Labor costs at an auto repair shop can add an additional $100 to $300 to the total bill. Keep in mind that diagnosis time and labor rates can vary, so it's recommended to inquire with local auto repair shops for a more accurate estimate.
Need more information about the B1840 2014 Chevrolet Silverado code?
Need more information on how to fix the B1840 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1840 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1840 2014 Chevrolet Silverado Code
1. What does the OBDII code B1840 mean in a 2014 Chevrolet Silverado?
The code B1840 indicates a problem with the Driver Seat Lumbar Up Switch Circuit, typically related to an electrical fault in the lumbar adjustment system.
2. What are common symptoms of the B1840 code in a 2014 Silverado?
Symptoms include the driver seat lumbar adjustment not working, intermittent functionality, or no response when pressing the lumbar up control.
3. What causes the B1840 code in a 2014 Silverado?
Common causes include a faulty lumbar up switch, a damaged or disconnected wiring harness, a short circuit, or a malfunctioning lumbar motor.
4. Can the B1840 code cause other issues in the vehicle?
This code is usually isolated to the lumbar adjustment system and does not typically affect other vehicle functions.
5. How do you diagnose the B1840 code in a 2014 Silverado?
Diagnosis involves inspecting the lumbar switch, checking for damaged or disconnected wiring, and using a multimeter to test for continuity and proper voltage in the circuit.
6. Can a blown fuse trigger the B1840 code in a 2014 Silverado?
Yes, a blown fuse in the power seat circuit could cause the lumbar adjustment system to fail, potentially triggering the B1840 code.
7. How is the B1840 code fixed in a 2014 Silverado?
Repairs may involve replacing the lumbar up switch, repairing or replacing damaged wiring, or replacing the lumbar motor if it is defective.
8. Is it safe to drive with the B1840 code in a 2014 Silverado?
Yes, the code does not impact the safety or drivability of the vehicle, but the lumbar adjustment function may not work properly.
9. How much does it cost to repair the B1840 code in a 2014 Silverado?
Repair costs can vary, but replacing a lumbar switch typically costs $50-$150 for parts and labor, while wiring repairs or a motor replacement may cost more.
10. Can the B1840 code clear itself in a 2014 Silverado?
The code is unlikely to clear itself unless the underlying issue is resolved, such as fixing a loose connection or replacing a faulty component.
Discuss the causes and fixes for B1840 2014 Chevrolet Silverado OBDII Code
Code B1840 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.