Engine-CodesToyota – B1835 2017 Toyota RAV4

B1835 2017 Toyota RAV4 Code - Short in Curtain Shield Squib Left Circuit

Quick Answer

The B1835 diagnostic trouble code (DTC) for a 2017 Toyota RAV4 indicates a short in the Curtain Shield Squib Left Circuit. Common causes include Short circuit in the wiring harness connected to the Curtain Shield Squib Left Circuit, Faulty Curtain Shield Squib Left Circuit component, Corrosion or damage to the connectors in the airbag system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1835 2017 Toyota RAV4 indicates Short in Curtain Shield Squib Left Circuit.
Common causes
Common causes include Short circuit in the wiring harness connected to the Curtain Shield Squib Left Circuit, Faulty Curtain Shield Squib Left Circuit component, Corrosion or damage to the connectors in the airbag system.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 14, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B1835 2017 Toyota RAV4 Description

The B1835 diagnostic trouble code (DTC) for a 2017 Toyota RAV4 indicates a short in the Curtain Shield Squib Left Circuit. The Curtain Shield Squib refers to the airbag system component responsible for deploying the side curtain airbags in the event of a collision or impact. The left circuit specifically refers to the side of the vehicle where the issue is detected.

OBDII Code B1835 2017 Toyota RAV4 - Short in Curtain Shield Squib Left Circuit
B1835 2017 Toyota RAV4 Code - Short in Curtain Shield Squib Left Circuit

Common Causes of B1835 2017 Toyota RAV4

  1. Short circuit in the wiring harness connected to the Curtain Shield Squib Left Circuit.
  2. Faulty Curtain Shield Squib Left Circuit component.
  3. Corrosion or damage to the connectors in the airbag system.
  4. Impact or collision that damaged the airbag system.
  5. Electrical issues in the vehicle's wiring system.

Symptoms of B1835 2017 Toyota RAV4

  1. Illumination of the airbag warning light on the dashboard.
  2. Inability to deploy the left side curtain airbag during a collision.
  3. Diagnostic trouble code B1835 stored in the vehicle's computer system.
  4. Loss of communication with the airbag system when scanned with a diagnostic tool.

How to Fix B1835 2017 Toyota RAV4

  1. Begin by disconnecting the vehicle's battery to prevent accidental deployment of the airbags.
  2. Inspect the wiring harness and connectors for any signs of damage, corrosion, or loose connections. Repair or replace as needed.
  3. Test the Curtain Shield Squib Left Circuit component for proper functionality. Replace if faulty.
  4. Clear the diagnostic trouble code from the vehicle's computer system using a scan tool.
  5. Reconnect the battery and test the airbag system to ensure proper deployment.

Cost to Fix B1835 2017 Toyota RAV4

The cost of repairing a short in the Curtain Shield Squib Left Circuit can vary depending on the extent of the damage and the specific components that need to be replaced. In general, the parts for this repair can range from $200 to $500, while labor costs can add another $100 to $300. Overall, the total repair cost for this issue is typically between $300 and $800. It's important to note that labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate.

Need more information about the B1835 2017 Toyota RAV4 code?

Need more information on how to fix the B1835 2017 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1835 2017 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1835 2017 Toyota RAV4 Code

1. What does the OBDII code B1835 mean for a 2017 Toyota RAV4?

B1835 indicates a short circuit in the left curtain shield airbag squib wiring, which is part of the airbag system.

2. What are the common symptoms of the B1835 code in a Toyota RAV4?

Typical symptoms include the airbag warning light illuminating on the dashboard and the potential deactivation of the affected airbag.

3. What causes the B1835 code to appear in a 2017 Toyota RAV4?

The code is usually triggered by damaged wiring, corroded connectors, or a short circuit in the left curtain shield airbag squib circuit.

4. Is it safe to drive with the B1835 code active?

No, it is not safe. The airbag system may not function properly in the event of a collision, compromising passenger safety.

5. How can I diagnose the B1835 code in my Toyota RAV4?

Start by inspecting the wiring and connectors for the left curtain shield airbag. Use a multimeter to check for short circuits or continuity issues.

6. Can a blown fuse cause the B1835 code?

While a blown fuse can affect the airbag system, the B1835 code specifically points to a short in the left curtain shield squib circuit, not a fuse.

7. What repairs are needed to fix the B1835 code?

Repairs may include replacing damaged wiring, fixing corroded connectors, or replacing the left curtain shield airbag if necessary.

8. How much does it cost to fix the B1835 code?

Repair costs vary depending on the issue, but fixing damaged wiring or connectors can range from $100 to $300. Airbag replacement could cost significantly more.

9. Can I clear the B1835 code without fixing the issue?

Clearing the code without addressing the underlying problem will likely result in the code returning, as the fault is still present.

10. Should I take my Toyota RAV4 to a professional for the B1835 code?

Yes, it’s recommended to have a professional diagnose and repair the airbag system to ensure proper functionality and safety.

Discuss the causes and fixes for B1835 2017 Toyota RAV4 OBDII Code

Code B1835 2017 Toyota RAV4 comments

No comments found for this page.