Engine-Codes.com
Engine-Codes – Scion – B1828 Scion

B1828 Scion Code - Short to Positive in Side Squib Left Circuit

Quick Answer

The B1828 diagnostic trouble code for Scion vehicles indicates a short to positive in the side squib left circuit. Common causes include Short circuit in the wiring harness connected to the side squib left component, Faulty side squib left component (airbag or seatbelt pretensioner), Corrosion or damage to the connectors in the side squib left circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1828 Scion indicates Short to Positive in Side Squib Left Circuit.
Common causes
Common causes include Short circuit in the wiring harness connected to the side squib left component, Faulty side squib left component (airbag or seatbelt pretensioner), Corrosion or damage to the connectors in the side squib left circuit.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 12, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B1828 Scion Description

The B1828 diagnostic trouble code for Scion vehicles indicates a short to positive in the side squib left circuit. The side squib left circuit is part of the vehicle's supplemental restraint system (SRS), commonly known as the airbag system. When a short to positive occurs in this circuit, it means that there is an unintended connection between the positive voltage supply and the side squib left component, which could be the airbag or the seatbelt pretensioner.

OBDII Code B1828 Scion - Short to Positive in Side Squib Left Circuit
B1828 Scion Code - Short to Positive in Side Squib Left Circuit

Common Causes of B1828 Scion

  1. Short circuit in the wiring harness connected to the side squib left component.
  2. Faulty side squib left component (airbag or seatbelt pretensioner).
  3. Corrosion or damage to the connectors in the side squib left circuit.
  4. Electrical issues such as a blown fuse or a faulty SRS control module.
  5. Impact or physical damage to the side squib left component due to a previous collision.

Symptoms of B1828 Scion

  1. Airbag warning light illuminated on the dashboard.
  2. Inability to turn off the airbag warning light even after resetting the system.
  3. Intermittent or non-functioning airbag deployment.
  4. Faulty seatbelt pretensioner operation.
  5. Diagnostic trouble code B1828 stored in the vehicle's computer system.

How to Fix B1828 Scion

  1. Diagnose the issue using a scan tool to retrieve the specific trouble code and identify the affected component.
  2. Inspect the wiring harness and connectors in the side squib left circuit for any signs of damage or corrosion.
  3. Test the side squib left component (airbag or seatbelt pretensioner) for proper functionality.
  4. Replace any damaged wiring, connectors, or components as necessary.
  5. Clear the trouble code from the vehicle's computer system and perform a test to ensure that the issue has been resolved.

Cost to Fix B1828 Scion

The cost of repairing a short to positive in the side squib left circuit can vary depending on the specific cause of the issue and the extent of the damage. In general, the repair costs for this type of problem can range from $200 to $800, including parts and labor. However, it is important to note that labor rates at auto repair shops can vary, with hourly rates typically ranging from $80 to $150. Additionally, the cost of parts and diagnostic time may also impact the overall repair expenses. It is advisable to consult with a qualified mechanic or dealership to obtain a more accurate estimate based on the specific circumstances of the vehicle.

Need more information about the B1828 Scion code?

Need more information on how to fix the B1828 Scion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1828 Scion code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1828 Scion Code

1. What does the OBDII code B1828 mean for a Scion?

The B1828 code indicates a "Short to Positive in Side Squib Left Circuit," which relates to the airbag system on the driver’s side.

2. What are the symptoms of the B1828 code in a Scion?

Common symptoms include the airbag warning light being illuminated and the airbag system potentially being disabled.

3. What causes the B1828 code in a Scion?

The most common causes are damaged wiring, a short circuit in the side airbag wiring harness, or a faulty side airbag module.

4. Is it safe to drive with the B1828 code present?

No, it’s not safe, as the airbag system may not function properly in the event of a collision.

5. How do you diagnose the B1828 code in a Scion?

A technician will inspect the wiring and connectors for damage, check for continuity in the circuit, and test the airbag module using a scan tool.

6. Can a loose connection cause the B1828 code?

Yes, a loose or corroded connector in the side airbag circuit can trigger this code.

7. How do you fix the B1828 code in a Scion?

Repairs may include replacing damaged wires, repairing short circuits, or replacing the side airbag module if it’s faulty.

8. Will clearing the code fix the B1828 issue?

Clearing the code will only reset the light temporarily; the underlying issue must be resolved to prevent the code from returning.

9. How much does it cost to repair the B1828 code in a Scion?

Repair costs vary, but they typically range from $150 to $500 depending on whether wiring repairs or airbag module replacement is required.

10. Can the B1828 code cause the airbag to deploy unexpectedly?

While rare, a short to positive in the circuit could potentially cause unintended airbag deployment, so addressing this issue promptly is crucial.

Discuss the causes and fixes for B1828 Scion OBDII Code

Submit a New Comment

Code B1828 Scion comments

No comments found for this page.