Engine-CodesScion – B1822 Scion

B1822 Scion Code - Short to Ground in Side Squib Right Circuit

Quick Answer

The B1822 Scion code indicates a short to ground in the Side Squib Right circuit. Common causes include Damaged wiring harness leading to a short to ground, Faulty side squib inflator module, Malfunctioning airbag control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1822 Scion indicates Short to Ground in Side Squib Right Circuit.
Common causes
Common causes include Damaged wiring harness leading to a short to ground, Faulty side squib inflator module, Malfunctioning airbag control module.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 17, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B1822 Scion Description

The B1822 Scion code indicates a short to ground in the Side Squib Right circuit. In simpler terms, this means that there is an electrical issue in the right side airbag system of the vehicle. The side squib refers to the airbag inflator module that is located in the side of the vehicle, typically in the seat or door. A short to ground means that there is an unintended connection between the electrical circuit and the vehicle's chassis or ground, which can cause the airbag system to malfunction.

OBDII Code B1822 Scion - Short to Ground in Side Squib Right Circuit
B1822 Scion Code - Short to Ground in Side Squib Right Circuit

Common Causes of B1822 Scion

  1. Damaged wiring harness leading to a short to ground
  2. Faulty side squib inflator module
  3. Malfunctioning airbag control module
  4. Electrical issues in the vehicle's wiring system

Symptoms of B1822 Scion

  1. Airbag warning light illuminated on the dashboard
  2. Inability to turn off the airbag warning light
  3. Non-deployment of the right side airbag in a crash
  4. Intermittent issues with the airbag system

How to Fix B1822 Scion

  1. Begin by diagnosing the specific cause of the short to ground in the Side Squib Right circuit using a diagnostic scanner to pinpoint the exact location of the fault.
  2. Inspect the wiring harness for any visible damage or wear and replace any damaged wires or connectors.
  3. Test the side squib inflator module and the airbag control module for proper functionality and replace if necessary.
  4. Clear the diagnostic trouble codes from the vehicle's system and perform a test to ensure that the issue has been resolved.
  5. If the problem persists, consult with a professional automotive technician to further diagnose and repair the issue.

Cost to Fix B1822 Scion

The typical repair costs for addressing a short to ground in the Side Squib Right circuit can range from $200 to $500, including parts and labor. However, it's important to note that the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less. It's advisable to check local rates for a more precise estimate.

Need more information about the B1822 Scion code?

Need more information on how to fix the B1822 Scion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1822 Scion code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1822 Scion Code

1. What does the OBDII code B1822 mean in a Scion?

B1822 indicates a "Short to Ground in Side Squib Right Circuit," which refers to an issue in the passenger-side airbag system wiring.

2. What are the symptoms of code B1822 in a Scion?

Common symptoms include the airbag warning light illuminating on the dashboard and possible deactivation of the passenger-side airbag.

3. What causes the B1822 code to appear?

This code is typically caused by damaged wiring, a corroded connector, or a short circuit in the passenger-side airbag system.

4. Can I drive my Scion with the B1822 code active?

While the vehicle may still drive normally, the airbag system may not function correctly, posing a safety risk in an accident.

5. How is the B1822 code diagnosed?

A technician will use a scan tool to confirm the code, then inspect the wiring, connectors, and airbag components in the passenger-side circuit for damage or corrosion.

6. What repairs might fix the B1822 code?

Repairs may include replacing damaged wiring, cleaning or replacing corroded connectors, or replacing a faulty airbag module.

7. Is it expensive to repair the B1822 code on a Scion?

Repair costs depend on the cause. Fixing a wiring issue is often less expensive, while replacing an airbag module can be more costly.

8. Can I reset the B1822 code myself?

Attempting to reset the code without addressing the underlying issue is not recommended, as it may compromise the airbag system's functionality.

9. How can I prevent the B1822 code from recurring?

Regularly inspect and maintain the airbag system's wiring and connectors, especially in areas prone to moisture or physical damage.

10. Should I attempt to fix the B1822 code on my own?

Airbag systems are safety-critical components. It's best to have a qualified technician diagnose and repair this issue to ensure proper functionality.

Discuss the causes and fixes for B1822 Scion OBDII Code

Code B1822 Scion comments

No comments found for this page.