B1816 Scion Code - Open In Front Passenger Side Squib 2nd Step Circuit
Quick Answer
The B1816 diagnostic trouble code for Scion vehicles indicates an open circuit in the front passenger side squib 2nd step circuit. Common causes include Loose or corroded electrical connections in the front passenger side squib 2nd step circuit, Damaged wiring harness leading to the airbag inflator module, Faulty front passenger side airbag inflator module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1816 Scion indicates Open In Front Passenger Side Squib 2nd Step Circuit.
- Common causes
- Common causes include Loose or corroded electrical connections in the front passenger side squib 2nd step circuit, Damaged wiring harness leading to the airbag inflator module, Faulty front passenger side airbag inflator module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1816 Scion Description
The B1816 diagnostic trouble code for Scion vehicles indicates an open circuit in the front passenger side squib 2nd step circuit. The squib refers to the airbag inflator module, which is a crucial safety component in the vehicle's supplemental restraint system (SRS). The 2nd step circuit is responsible for deploying the airbag in the event of a collision or impact.
Common Causes of B1816 Scion
- Loose or corroded electrical connections in the front passenger side squib 2nd step circuit
- Damaged wiring harness leading to the airbag inflator module
- Faulty front passenger side airbag inflator module
- Malfunctioning airbag control module
- Impact or collision that caused damage to the SRS components
Symptoms of B1816 Scion
- Airbag warning light illuminated on the dashboard
- SRS (Supplemental Restraint System) warning message displayed on the instrument cluster
- Front passenger side airbag may not deploy in a collision
- Diagnostic trouble code B1816 stored in the vehicle's computer system
How to Fix B1816 Scion
- Begin by disconnecting the vehicle's battery to prevent accidental airbag deployment.
- Inspect the wiring harness and connectors in the front passenger side squib 2nd step circuit for any damage or corrosion. Repair or replace as necessary.
- Check the front passenger side airbag inflator module for proper functioning. Replace if found to be faulty.
- Clear the diagnostic trouble code from the vehicle's computer system using a compatible scan tool.
- Reconnect the battery and test the SRS system to ensure proper operation and that the airbag deploys as intended.
Cost to Fix B1816 Scion
The cost of repairing a B1816 code in a Scion vehicle can vary depending on the specific cause of the issue and the extent of the repair needed. In general, the cost of parts for this repair can range from $200 to $500, including the replacement of any damaged components such as wiring harnesses or airbag modules. Labor costs can add an additional $100 to $300, depending on the shop's hourly rates and the complexity of the repair.
Need more information about the B1816 Scion code?
Need more information on how to fix the B1816 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1816 Scion code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1816 Scion Code
1. What does the OBDII code B1816 mean on a Scion?
The B1816 code indicates an "Open in Front Passenger Side Squib 2nd Step Circuit," which relates to a fault in the airbag system for the front passenger seat.
2. What are the common symptoms of the B1816 code?
The most common symptoms include an illuminated airbag warning light on the dashboard and the airbag system being disabled or non-functional.
3. What causes the B1816 code to trigger?
The code is typically caused by a damaged or disconnected wiring harness, a faulty airbag module, corroded connectors, or an issue with the clock spring.
4. Can I drive my Scion with the B1816 code active?
While the vehicle may still operate, driving with this code active is not recommended, as it means the airbag system may not deploy properly in an accident.
5. How is the B1816 code diagnosed?
A technician will use a scan tool to confirm the code, inspect the wiring and connectors for damage or corrosion, and test the resistance in the squib circuit to identify the fault.
6. What repairs are needed to fix the B1816 code?
Repairs may include reconnecting or replacing damaged wiring, cleaning corroded connectors, repairing or replacing the clock spring, or replacing the airbag module if defective.
7. How much does it cost to fix the B1816 code on a Scion?
Repair costs can vary but typically range from $100 to $500 depending on whether it's a wiring issue or if major components like the airbag module need replacement.
8. Can I reset the B1816 code without repairs?
Resetting the code without addressing the underlying issue is not recommended, as the airbag system will remain compromised and the code will likely return.
9. How can I prevent the B1816 code from occurring?
Regularly inspect the airbag system wiring and connectors for wear or damage, and avoid tampering with airbag-related components without proper knowledge or tools.
10. Does the B1816 code affect other systems in my Scion?
No, the B1816 code specifically affects the airbag system. Other vehicle systems should function normally, but the airbag system will be disabled until the issue is resolved.
Discuss the causes and fixes for B1816 Scion OBDII Code
Code B1816 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.