B1808 Lexus Code - Short To Positive In Front Passenger Side Squib Circuit
Quick Answer
The B1808 diagnostic trouble code (DTC) for Lexus vehicles indicates a "Short To Positive In Front Passenger Side Squib Circuit." In simpler terms, this code signifies that there is an electrical issue in the front passenger side airbag system of the vehicle. Common causes include Wiring damage or short circuits in the front passenger side squib circuit, Faulty or damaged squib circuit components, Corrosion or poor connections in the airbag system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1808 Lexus indicates Short To Positive In Front Passenger Side Squib Circuit.
- Common causes
- Common causes include Wiring damage or short circuits in the front passenger side squib circuit, Faulty or damaged squib circuit components, Corrosion or poor connections in the airbag system.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1808 Lexus Description
The B1808 diagnostic trouble code (DTC) for Lexus vehicles indicates a "Short To Positive In Front Passenger Side Squib Circuit." In simpler terms, this code signifies that there is an electrical issue in the front passenger side airbag system of the vehicle. The squib circuit refers to the electrical circuit responsible for deploying the airbag in case of a collision. A short to positive means that there is an unintended connection between the positive power supply and the circuit, which can lead to malfunctions in the airbag deployment system.
Common Causes of B1808 Lexus
- Wiring damage or short circuits in the front passenger side squib circuit
- Faulty or damaged squib circuit components
- Corrosion or poor connections in the airbag system
- Electrical issues in the vehicle's wiring harness
- Impact or collision that damaged the airbag system components
Symptoms of B1808 Lexus
- Illumination of the airbag warning light on the dashboard
- Inability to turn off the airbag warning light even after resetting
- Non-deployment of the front passenger side airbag during a crash
- Intermittent or erratic airbag deployment
- Diagnostic trouble code B1808 stored in the vehicle's computer system
How to Fix B1808 Lexus
- Diagnose the root cause of the short to positive in the front passenger side squib circuit using a diagnostic scan tool.
- Inspect the wiring harness and connectors for any damage, corrosion, or poor connections.
- Repair or replace any damaged wiring, connectors, or components in the squib circuit.
- Clear the diagnostic trouble code from the vehicle's computer system and perform a test to ensure the airbag system functions properly.
- Reset the airbag warning light on the dashboard if it was illuminated due to the B1808 code.
Cost to Fix B1808 Lexus
The typical repair costs for addressing a short to positive in the front passenger side squib circuit can vary depending on the extent of the damage and the specific components that need to be repaired or replaced. In general, the parts required for this repair, such as wiring, connectors, or airbag system components, can range from $200 to $500. Labor costs for diagnosing and repairing the issue can add another $200 to $500 to the total repair bill. Overall, the total cost of addressing a B1808 diagnostic trouble code could range from $400 to $1000, including parts and labor.
Need more information about the B1808 Lexus code?
Need more information on how to fix the B1808 Lexus code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1808 Lexus code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1808 Lexus Code
1. What are the common symptoms of OBDII code B1808 in a Lexus related to a short to positive in the front passenger side squib circuit?
The common symptoms include the airbag warning light illuminating on the dashboard and potential non-deployment of the passenger-side airbag in the event of a collision.
2. What are the possible causes of OBDII code B1808 in a Lexus indicating a short to positive in the front passenger side squib circuit?
Possible causes include damaged wiring or connectors in the front passenger side airbag system, a faulty squib circuit, or a malfunctioning airbag control module.
3. How can I diagnose OBDII code B1808 in my Lexus to confirm a short to positive in the front passenger side squib circuit?
Diagnosis typically involves using a OBDII scanner to retrieve the specific fault code, inspecting the wiring and connectors in the front passenger side airbag system, and performing circuit tests to identify the location of the short to positive.
4. Is it safe to drive my Lexus with OBDII code B1808 indicating a short to positive in the front passenger side squib circuit?
It is not recommended to drive the vehicle with this fault code present, as it indicates a potential issue with the passenger-side airbag system, which could affect occupant safety in the event of a collision.
5. Can I repair OBDII code B1808 related to a short to positive in the front passenger side squib circuit on my own?
Repairing this issue may require specialized knowledge and tools, so it is advisable to consult a professional mechanic or a Lexus dealership to accurately diagnose and repair the problem.
6. How much does it typically cost to repair OBDII code B1808 in a Lexus caused by a short to positive in the front passenger side squib circuit?
The cost of repair can vary depending on the specific cause of the issue, but it may involve replacing damaged wiring, connectors, or components in the front passenger side airbag system, which can range from a few hundred to over a thousand dollars.
7. Are there any safety precautions I should take when working on OBDII code B1808 in a Lexus due to a short to positive in the front passenger side squib circuit?
When working on the airbag system, it is crucial to disconnect the vehicle's battery and wait for a specified amount of time to discharge any stored energy to avoid accidental deployment of the airbags.
8. How long does it typically take to repair OBDII code B1808 linked to a short to positive in the front passenger side squib circuit in a Lexus?
The repair time can vary depending on the extent of the damage and the availability of parts, but it may take a few hours to a full day to diagnose and fix the issue.
9. Can OBDII code B1808 in a Lexus be triggered intermittently due to a short to positive in the front passenger side squib circuit?
Yes, intermittent faults can sometimes occur in the airbag system, leading to the sporadic illumination of the airbag warning light and potential issues with the passenger-side airbag deployment.
10. Will resetting the OBDII code B1808 related to a short to positive in the front passenger side squib circuit in a Lexus make the problem go away?
Resetting the fault code may temporarily clear the warning light, but it will not fix the underlying issue causing the short to positive in the front passenger side squib circuit. It is essential to diagnose and repair the problem to ensure the airbag system functions correctly.
Discuss the causes and fixes for B1808 Lexus OBDII Code
Code B1808 Lexus comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.