B1806 Jeep Code - Passenger Door Lock/Unlock Switch Circuit Low
Quick Answer
The B1806 diagnostic trouble code (DTC) for Jeep vehicles specifically refers to an issue with the passenger door lock/unlock switch circuit being detected as low. Common causes include Faulty passenger door lock/unlock switch, Damaged wiring harness leading to the switch, Loose or corroded electrical connections. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1806 Jeep indicates Passenger Door Lock/Unlock Switch Circuit Low.
- Common causes
- Common causes include Faulty passenger door lock/unlock switch, Damaged wiring harness leading to the switch, Loose or corroded electrical connections.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1806 Jeep Description
The B1806 diagnostic trouble code (DTC) for Jeep vehicles specifically refers to an issue with the passenger door lock/unlock switch circuit being detected as low. This means that there is a problem with the electrical circuit that controls the lock and unlock function of the passenger door. The switch may not be sending the correct signal to the vehicle's body control module, causing the system to register a low voltage condition.
Common Causes of B1806 Jeep
- Faulty passenger door lock/unlock switch.
- Damaged wiring harness leading to the switch.
- Loose or corroded electrical connections.
- Malfunctioning body control module.
- Water or moisture intrusion causing electrical issues.
Symptoms of B1806 Jeep
- Inability to lock or unlock the passenger door using the switch.
- Intermittent operation of the door lock/unlock function.
- Audible clicking or buzzing noises when attempting to lock or unlock the door.
- Warning light on the dashboard indicating a door lock/unlock system fault.
How to Fix B1806 Jeep
- Begin by disconnecting the vehicle's battery to prevent any electrical mishaps.
- Remove the door panel to access the passenger door lock/unlock switch.
- Test the switch using a multimeter to determine if it is sending the correct signals.
- Inspect the wiring harness for any damage or corrosion, repairing or replacing as needed.
- Check the body control module for any fault codes and address any issues found.
Cost to Fix B1806 Jeep
The cost of repairing a B1806 code related to the passenger door lock/unlock switch circuit low can vary depending on the specific cause of the issue. On average, the repair cost can range from $100 to $300, including parts and labor. However, it is important to note that diagnostic time and labor rates at auto repair shops can vary significantly based on location, vehicle make and model, and engine type. It is advisable to contact local auto repair shops for a more accurate estimate based on the specific circumstances.
Need more information about the B1806 Jeep code?
Need more information on how to fix the B1806 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1806 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1806 Jeep Code
1. What are the common symptoms of OBDII code B1806 in a Jeep related to the Passenger Door Lock/Unlock Switch Circuit Low?
- Common symptoms include malfunctioning passenger door lock/unlock switch, inability to lock or unlock the door electronically, and warning lights on the dashboard.
2. What are the possible causes of OBDII code B1806 in a Jeep indicating a Passenger Door Lock/Unlock Switch Circuit Low?
- Possible causes include damaged wiring or connectors in the door lock switch circuit, a faulty door lock switch, or a malfunctioning body control module.
3. How can I diagnose the issue causing OBDII code B1806 in a Jeep related to the Passenger Door Lock/Unlock Switch Circuit Low?
- Diagnosis involves checking the wiring and connectors for damage, testing the door lock switch for functionality, and using an OBDII scanner to read and clear the code.
4. Is it safe to continue driving my Jeep with OBDII code B1806 related to the Passenger Door Lock/Unlock Switch Circuit Low?
- It is generally safe to drive the vehicle with this code, but it is recommended to address the issue promptly to avoid potential inconvenience or safety concerns.
5. Can I repair OBDII code B1806 in a Jeep indicating a Passenger Door Lock/Unlock Switch Circuit Low myself?
- Depending on your experience and tools, you may be able to repair this issue yourself by inspecting and repairing wiring, replacing the door lock switch, or addressing any other identified faults.
6. Are there any simple tips to troubleshoot OBDII code B1806 in a Jeep related to the Passenger Door Lock/Unlock Switch Circuit Low?
- You can start by checking the fuse related to the door locks, ensuring the switch is clean and functioning properly, and inspecting the wiring for any visible damage.
7. How much does it typically cost to repair OBDII code B1806 in a Jeep due to the Passenger Door Lock/Unlock Switch Circuit Low?
- The cost of repair can vary depending on the exact cause of the issue, but it may involve expenses for parts like a new door lock switch and labor for installation.
8. Can a malfunctioning key fob cause OBDII code B1806 related to the Passenger Door Lock/Unlock Switch Circuit Low in a Jeep?
- A malfunctioning key fob can sometimes contribute to issues with door lock functionality but is not a direct cause of the specific circuit low code.
9. Will resetting the OBDII code B1806 related to the Passenger Door Lock/Unlock Switch Circuit Low make the problem go away permanently?
- Resetting the code may temporarily clear the warning light, but if the underlying issue is not addressed, the code is likely to reappear as the problem persists.
10. Is it necessary to visit a dealership for repairs related to OBDII code B1806 in a Jeep due to the Passenger Door Lock/Unlock Switch Circuit Low?
- While a dealership can provide specialized service, independent mechanics or DIY repairs can also effectively address the issue, potentially offering cost savings.
Discuss the causes and fixes for B1806 Jeep OBDII Code
Code B1806 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.