Engine-Codes.com
Engine-Codes – Jeep – B17FB Jeep

B17FB Jeep Code - Auto High Beam Camera View Blocked

Quick Answer

The B17FB diagnostic trouble code (DTC) indicates that the auto high beam camera system in a Jeep vehicle has detected an obstruction that is preventing it from functioning correctly. Common causes include Obstruction on the camera lens, such as dirt, ice, or snow, Misalignment of the auto high beam camera due to physical impact or improper installation, Faulty camera module or wiring issues leading to poor communication with the vehicle’s control systems. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B17FB Jeep indicates Auto High Beam Camera View Blocked.
Common causes
Common causes include Obstruction on the camera lens, such as dirt, ice, or snow, Misalignment of the auto high beam camera due to physical impact or improper installation, Faulty camera module or wiring issues leading to poor communication with the vehicle’s control systems.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Oct 18, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B17FB Jeep Description

The B17FB diagnostic trouble code (DTC) indicates that the auto high beam camera system in a Jeep vehicle has detected an obstruction that is preventing it from functioning correctly. This system is designed to automatically switch between high and low beams based on the presence of oncoming traffic or vehicles ahead, enhancing nighttime visibility while reducing glare for other drivers. When the camera view is blocked, the system cannot accurately assess the surrounding environment, leading to potential safety issues.

OBDII Code B17FB Jeep - Auto High Beam Camera View Blocked
B17FB Jeep Code - Auto High Beam Camera View Blocked

Common Causes of B17FB Jeep

  1. Obstruction on the camera lens, such as dirt, ice, or snow.
  2. Misalignment of the auto high beam camera due to physical impact or improper installation.
  3. Faulty camera module or wiring issues leading to poor communication with the vehicle’s control systems.
  4. Software glitches or outdated firmware in the vehicle’s electronic control unit (ECU).
  5. Aftermarket modifications that interfere with the camera's line of sight.

Symptoms of B17FB Jeep

  1. Auto high beam feature does not activate or deactivate as intended.
  2. Warning light or message displayed on the dashboard indicating a malfunction.
  3. Reduced visibility during nighttime driving due to reliance on low beams.
  4. Increased frequency of manual headlight adjustments by the driver.
  5. Possible erratic behavior of other lighting systems or related features.

How to Fix B17FB Jeep

  1. Inspection and Cleaning: Begin by visually inspecting the camera lens for any obstructions. Clean the lens thoroughly to remove dirt, ice, or debris that may be blocking the view.
  2. Camera Alignment Check: Verify that the camera is properly aligned according to manufacturer specifications. If misaligned, adjust the camera position as needed.
  3. Wiring Inspection: Examine the wiring connected to the camera for any signs of damage, corrosion, or loose connections. Repair or replace any faulty wiring as necessary.
  4. Software Update: Check for any available software updates for the vehicle’s ECU that may address known issues with the auto high beam system. Update the software if necessary.
  5. Component Replacement: If the camera module is determined to be faulty after testing, replace it with a new unit to restore functionality to the auto high beam system.

Cost to Fix B17FB Jeep

The cost to repair the B17FB code can vary widely depending on the specific issue identified during diagnosis. Typical repair costs may range from $100 to $500. Cleaning or adjusting the camera may only incur a minimal labor charge, while replacing the camera module could be more expensive due to parts and labor. It's important to note that the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Most auto repair shops commonly charge between $80 and $150 per hour; however, rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less. It is advisable to check local rates for a more precise estimate.

Need more information about the B17FB Jeep code?

Need more information on how to fix the B17FB Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B17FB Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B17FB Jeep Code

1. What are the common symptoms of OBDII code B17FB in a Jeep related to the Auto High Beam Camera View Blocked?

- The most common symptom is a warning message or indicator light on the dashboard indicating that the auto high beam camera view is blocked.

2. What are the possible causes of the Auto High Beam Camera View Blocked code (B17FB) in a Jeep?

- The code may be triggered by a dirty or obstructed camera lens, a faulty camera module, wiring issues, or a misalignment of the camera.

3. How can I diagnose the Auto High Beam Camera View Blocked issue in my Jeep?

- Start by checking the camera lens for any dirt, debris, or blockages. Inspect the wiring for any damage or loose connections. If needed, use a diagnostic tool to read the code and gather more specific information.

4. Can I repair the Auto High Beam Camera View Blocked problem in my Jeep myself?

- Depending on the cause, you may be able to clean the camera lens, remove any obstructions, or secure loose wiring yourself. However, for more complex issues like a faulty camera module, it is recommended to seek professional assistance.

5. Is it safe to drive my Jeep with the Auto High Beam Camera View Blocked warning active?

- While the issue may not affect the overall drivability of your Jeep, it is important to address the root cause of the problem to ensure that the auto high beam system functions correctly and maintains optimal visibility.

6. How much does it typically cost to repair the Auto High Beam Camera View Blocked code in a Jeep?

- The cost of repair can vary depending on the cause of the issue. Simple fixes like cleaning the camera lens may be inexpensive, while replacing a faulty camera module or addressing wiring issues can be more costly.

7. Can extreme weather conditions contribute to the Auto High Beam Camera View Blocked problem in a Jeep?

- Yes, extreme weather conditions like heavy snow, rain, or mud can lead to the camera lens getting dirty or obstructed, triggering the B17FB code.

8. Are there any preventative measures I can take to avoid the Auto High Beam Camera View Blocked issue in my Jeep?

- Regularly cleaning the camera lens, avoiding driving in extreme weather conditions, and ensuring proper maintenance of the auto high beam system can help prevent the recurrence of this problem.

9. Will resetting the OBDII system clear the B17FB code related to the Auto High Beam Camera View Blocked issue in my Jeep?

- Resetting the system may clear the code temporarily, but if the root cause of the problem is not addressed, the code is likely to reappear. It's important to diagnose and fix the underlying issue to prevent future occurrences.

10. Can the Auto High Beam Camera View Blocked issue affect other systems or components in my Jeep?

- While the primary impact of the issue is related to the auto high beam camera system, unresolved problems with the camera view being blocked can potentially affect other advanced driver assistance systems that rely on the camera's input.

Discuss the causes and fixes for B17FB Jeep OBDII Code

Submit a New Comment

Code B17FB Jeep comments

No comments found for this page.