Engine-CodesToyota – B1787 2018 Toyota RAV4

B1787 2018 Toyota RAV4 Code - Rear Occupant Classification Sensor Left Collision Detection

Quick Answer

The B1787 diagnostic trouble code (DTC) for a 2018 Toyota RAV4 specifically relates to the Rear Occupant Classification Sensor Left Collision Detection system. Common causes include Faulty rear occupant classification sensor, Damaged wiring harness or connectors, Defective control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1787 2018 Toyota RAV4 indicates Rear Occupant Classification Sensor Left Collision Detection.
Common causes
Common causes include Faulty rear occupant classification sensor, Damaged wiring harness or connectors, Defective control module.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 08, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B1787 2018 Toyota RAV4 Description

The B1787 diagnostic trouble code (DTC) for a 2018 Toyota RAV4 specifically relates to the Rear Occupant Classification Sensor Left Collision Detection system. This code indicates a fault or malfunction in the sensor that is responsible for detecting occupants in the rear left side of the vehicle, particularly during a collision. The sensor plays a crucial role in the vehicle's safety system, as it helps the airbag system to determine the appropriate deployment strategy based on the size and weight of the occupants in that specific seating position.

OBDII Code B1787 2018 Toyota RAV4 - Rear Occupant Classification Sensor Left Collision Detection
B1787 2018 Toyota RAV4 Code - Rear Occupant Classification Sensor Left Collision Detection

Common Causes of B1787 2018 Toyota RAV4

  1. Faulty rear occupant classification sensor
  2. Damaged wiring harness or connectors
  3. Defective control module
  4. Corrosion or debris affecting sensor performance
  5. Impact or collision that damaged the sensor or related components

Symptoms of B1787 2018 Toyota RAV4

  1. Airbag warning light illuminated on the dashboard
  2. Inconsistent or erratic behavior of the airbag system
  3. Failure of the rear left side airbag to deploy during a collision
  4. False alarms or warnings related to the rear left seat occupancy

How to Fix B1787 2018 Toyota RAV4

  1. Diagnose the root cause of the issue using a diagnostic scanner and specialized tools.
  2. Inspect the rear occupant classification sensor and related components for damage or malfunction.
  3. Replace the faulty sensor, wiring harness, control module, or any other damaged components.
  4. Clear the DTC from the vehicle's memory using the diagnostic scanner.
  5. Perform a system test to ensure proper functioning of the rear occupant classification sensor and airbag system.

Cost to Fix B1787 2018 Toyota RAV4

The typical repair costs for addressing the B1787 DTC on a 2018 Toyota RAV4 can vary depending on the extent of the issue and the specific components that need to be replaced. In general, the cost of parts for a rear occupant classification sensor and related components can range from $200 to $500. Additionally, labor costs for diagnosis, repair, and system testing can amount to $300 to $800. Overall, the total repair cost for this issue may fall in the range of $500 to $1300.

Need more information about the B1787 2018 Toyota RAV4 code?

Need more information on how to fix the B1787 2018 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1787 2018 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1787 2018 Toyota RAV4 Code

What does OBDII code B1787 mean for a 2018 Toyota RAV4?

B1787 indicates a fault with the rear occupant classification sensor on the left side, specifically related to collision detection.

What are the common symptoms of code B1787?

Common symptoms include warning lights on the dashboard, malfunctioning rear seat airbags, and potential issues with the occupant detection system.

What causes the B1787 code to trigger?

The code can be triggered by a faulty rear occupant classification sensor, damaged wiring or connectors, or issues within the airbag control module.

How can I diagnose the B1787 code?

To diagnose B1787, use an OBDII scanner to confirm the code and check for related codes. Inspect the rear occupant classification sensor and wiring for damage.

Can I drive my 2018 Toyota RAV4 with the B1787 code?

While you can technically drive the vehicle, it is not recommended as it may lead to airbag system malfunction, increasing the risk of injury in an accident.

What repairs are typically needed to fix the B1787 code?

Repairs may involve replacing the rear occupant classification sensor, repairing damaged wiring, or reprogramming the airbag control module if necessary.

How do I reset the B1787 code after repairs?

After repairs, the code can be reset using an OBDII scanner. Ensure that the issue is resolved before clearing the code.

Is the rear occupant classification sensor expensive to replace?

The cost of replacing the rear occupant classification sensor can vary, but it typically ranges from $150 to $400, depending on parts and labor.

Can I fix the B1787 code myself?

If you have experience with automotive repairs, you may be able to diagnose and replace the sensor yourself, but it is recommended to consult a professional for airbag system issues.

Discuss the causes and fixes for B1787 2018 Toyota RAV4 OBDII Code

Code B1787 2018 Toyota RAV4 comments

No comments found for this page.