Engine-CodesHyundai – B1745 Hyundai

B1745 Hyundai Code - Pressure-Side Impact Sensor Front Passenger Defect

Quick Answer

The B1745 Hyundai diagnostic trouble code indicates a problem with the Pressure-Side Impact Sensor Front Passenger in the vehicle. Common causes include Faulty pressure-side impact sensor front passenger, Damaged wiring or connectors leading to the sensor, Corrosion or water damage affecting the sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1745 Hyundai indicates Pressure-Side Impact Sensor Front Passenger Defect.
Common causes
Common causes include Faulty pressure-side impact sensor front passenger, Damaged wiring or connectors leading to the sensor, Corrosion or water damage affecting the sensor.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 12, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B1745 Hyundai Description

The B1745 Hyundai diagnostic trouble code indicates a problem with the Pressure-Side Impact Sensor Front Passenger in the vehicle. This sensor is a crucial component of the vehicle's safety system, specifically designed to detect impacts on the front passenger side of the vehicle. When this sensor is defective, it can significantly impact the overall safety of the vehicle and its occupants.

OBDII Code B1745 Hyundai - Pressure-Side Impact Sensor Front Passenger Defect
B1745 Hyundai Code - Pressure-Side Impact Sensor Front Passenger Defect

Common Causes of B1745 Hyundai

  1. Faulty pressure-side impact sensor front passenger.
  2. Damaged wiring or connectors leading to the sensor.
  3. Corrosion or water damage affecting the sensor.
  4. Impact or collision causing physical damage to the sensor.
  5. Issue with the airbag control module receiving signals from the sensor.

Symptoms of B1745 Hyundai

  1. Airbag warning light illuminated on the dashboard.
  2. Inconsistent deployment of airbags during testing.
  3. Vehicle's safety system showing a fault code related to the front passenger side impact sensor.
  4. Vehicle's safety system indicating a malfunction in the front passenger side impact sensor.

How to Fix B1745 Hyundai

  1. Begin by conducting a thorough diagnostic scan to confirm the B1745 code and identify the specific cause of the issue.
  2. Inspect the pressure-side impact sensor front passenger for any physical damage, corrosion, or water intrusion. Replace the sensor if necessary.
  3. Check the wiring and connectors leading to the sensor for any damage or loose connections. Repair or replace as needed.
  4. Clear the fault code from the vehicle's system and perform a test to ensure the sensor is functioning correctly and communicating with the airbag control module.
  5. Finally, reset the vehicle's airbag system and ensure that all safety features are operational.

Cost to Fix B1745 Hyundai

The typical repair costs for addressing the B1745 Hyundai code can vary depending on the specific cause of the issue and the cost of parts and labor. On average, repairing a faulty pressure-side impact sensor front passenger can range from $200 to $500, including parts and labor. However, it is essential to note that diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Auto repair shops commonly charge between $80 and $150 per hour for labor, with rates potentially higher in metropolitan areas or at dealerships. It is advisable to check local rates for a more accurate estimate of the repair costs associated with this code.

Need more information about the B1745 Hyundai code?

Need more information on how to fix the B1745 Hyundai code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1745 Hyundai code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1745 Hyundai Code

1. What are the common symptoms of OBDII code B1745 in a Hyundai related to the Pressure-Side Impact Sensor Front Passenger defect?

The common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the front passenger airbag deployment system.

2. What could be the possible causes of OBDII code B1745 in a Hyundai indicating a Pressure-Side Impact Sensor Front Passenger defect?

Possible causes include a malfunction in the pressure-side impact sensor located on the front passenger side, wiring issues, or a faulty sensor module.

3. How can I diagnose the Pressure-Side Impact Sensor Front Passenger defect causing OBDII code B1745 in my Hyundai?

Diagnosis involves using an OBDII scanner to retrieve the specific code, inspecting the pressure-side impact sensor for any physical damage, and checking the wiring connections for continuity and proper voltage.

4. Is it safe to drive my Hyundai with OBDII code B1745 related to the Pressure-Side Impact Sensor Front Passenger defect?

It is not recommended to drive the vehicle with this code present, as it may affect the proper functioning of the front passenger airbag system in the event of a collision.

5. Can I reset the OBDII code B1745 related to the Pressure-Side Impact Sensor Front Passenger defect in my Hyundai?

While you can clear the code with an OBDII scanner, it is important to address the underlying issue causing the code to prevent potential safety risks.

6. How much does it typically cost to repair the Pressure-Side Impact Sensor Front Passenger defect triggering OBDII code B1745 in a Hyundai?

The cost of repair can vary depending on the exact cause of the issue, but it may involve replacing the pressure-side impact sensor, repairing wiring, or addressing any module malfunctions.

7. Are there any DIY tips for troubleshooting OBDII code B1745 linked to the Pressure-Side Impact Sensor Front Passenger defect in a Hyundai?

DIY tips may include visually inspecting the sensor and wiring for any obvious damage, checking the connections for security, and consulting the vehicle's service manual for specific troubleshooting steps.

8. How crucial is it to address OBDII code B1745 indicating a Pressure-Side Impact Sensor Front Passenger defect in a Hyundai promptly?

It is essential to address this code promptly to ensure the proper functioning of the front passenger airbag system and maintain the vehicle's safety features in case of an accident.

9. Can a mechanic without Hyundai-specific experience repair the Pressure-Side Impact Sensor Front Passenger defect causing OBDII code B1745?

While a knowledgeable mechanic can diagnose and repair the issue, it may be beneficial to seek a technician with experience working on Hyundai vehicles for more efficient and accurate repairs.

10. Will fixing the Pressure-Side Impact Sensor Front Passenger defect and clearing OBDII code B1745 in my Hyundai require resetting or recalibrating any system components?

After repairing the issue, it is advisable to clear the code and potentially recalibrate the airbag system to ensure proper functionality and accuracy in case of future impacts.

Discuss the causes and fixes for B1745 Hyundai OBDII Code

Code B1745 Hyundai comments

No comments found for this page.