B1738 KIA Code - Pressure-Side Impact Sensor Front Driver Wrong ID
Quick Answer
The B1738 diagnostic trouble code for KIA vehicles indicates that there is an issue with the Pressure-Side Impact Sensor Front Driver Wrong ID. Common causes include Faulty pressure-side impact sensor, Damaged wiring or connectors leading to the sensor, Corrosion or moisture intrusion affecting sensor performance. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1738 KIA indicates Pressure-Side Impact Sensor Front Driver Wrong ID.
- Common causes
- Common causes include Faulty pressure-side impact sensor, Damaged wiring or connectors leading to the sensor, Corrosion or moisture intrusion affecting sensor performance.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1738 KIA Description
The B1738 diagnostic trouble code for KIA vehicles indicates that there is an issue with the Pressure-Side Impact Sensor Front Driver Wrong ID. This sensor is a crucial component of the vehicle's supplemental restraint system, specifically designed to detect and respond to side impacts on the driver's side. When the sensor detects a collision, it sends a signal to the airbag control module to deploy the appropriate airbags to protect the occupants in the event of a crash.
Common Causes of B1738 KIA
- Faulty pressure-side impact sensor
- Damaged wiring or connectors leading to the sensor
- Corrosion or moisture intrusion affecting sensor performance
- Communication error between sensor and airbag control module
- Software glitch in the airbag control module
Symptoms of B1738 KIA
- Airbag warning light illuminated on the dashboard
- Inaccurate or inconsistent airbag deployment in crash tests
- Erratic behavior of other safety systems linked to the airbag control module
- Vehicle fails to pass state inspection due to airbag system fault
How to Fix B1738 KIA
- Begin by conducting a thorough inspection of the pressure-side impact sensor, wiring, and connectors for any visible damage or corrosion.
- Use a diagnostic scanner to retrieve the specific trouble code and further pinpoint the exact cause of the issue.
- If the sensor is faulty, replace it with a new OEM part to ensure proper functionality.
- Check and repair any damaged wiring or connectors, ensuring a secure connection between the sensor and the airbag control module.
- Clear the trouble code from the system and perform a test to verify that the issue has been resolved.
Cost to Fix B1738 KIA
The typical repair cost for addressing the B1738 code related to the Pressure-Side Impact Sensor Front Driver Wrong ID in a KIA vehicle can range from $200 to $500, including both parts and labor. However, it's important to note that the actual cost can vary depending on the specific model of the vehicle, the location of the repair shop, and any additional issues that may be uncovered during the diagnostic process. As mentioned earlier, labor rates at auto repair shops can vary widely, so it's advisable to obtain quotes from multiple sources to ensure a competitive price.
Need more information about the B1738 KIA code?
Need more information on how to fix the B1738 KIA code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1738 KIA code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1738 KIA Code
1. What are the common symptoms of OBDII code B1738 KIA?
The common symptoms of OBDII code B1738 KIA, Pressure-Side Impact Sensor Front Driver Wrong ID, may include the airbag warning light illuminating on the dashboard and potential issues with the airbag system.
2. What could cause the OBDII code B1738 KIA to trigger?
The OBDII code B1738 KIA is typically triggered when the pressure-side impact sensor front driver sends an incorrect identification signal to the vehicle's electronic control unit (ECU).
3. How serious is the OBDII code B1738 KIA?
The OBDII code B1738 KIA indicates a potential issue with the front driver's pressure-side impact sensor, which is a crucial component of the vehicle's airbag system. It is important to address this issue promptly to ensure the proper functioning of the airbags in case of an impact.
4. Can I continue driving with the OBDII code B1738 KIA?
It is not recommended to continue driving with the OBDII code B1738 KIA present, as it may affect the proper deployment of the airbags in case of an accident. It is advisable to have the issue diagnosed and repaired by a qualified mechanic as soon as possible.
5. How can I diagnose and repair the OBDII code B1738 KIA?
Diagnosing and repairing the OBDII code B1738 KIA requires specialized diagnostic equipment to pinpoint the exact cause of the issue. It is recommended to consult a professional mechanic who has experience working with automotive airbag systems.
6. Is the repair for OBDII code B1738 KIA costly?
The repair cost for OBDII code B1738 KIA can vary depending on the underlying cause of the issue and the specific components that need to be replaced. It is advisable to obtain a few quotes from different mechanics to compare prices.
7. Can an OBDII scanner clear the OBDII code B1738 KIA?
Using an OBDII scanner to clear the OBDII code B1738 KIA may temporarily turn off the warning light, but it will not fix the underlying issue with the front driver's pressure-side impact sensor. It is essential to address the root cause of the problem for a permanent solution.
8. Are there any safety risks associated with the OBDII code B1738 KIA?
The OBDII code B1738 KIA indicates a potential issue with the airbag system's front driver's pressure-side impact sensor, which could affect the proper deployment of the airbags in case of a collision. Ignoring this issue may pose safety risks to vehicle occupants.
9. How long does it take to repair the OBDII code B1738 KIA?
The repair time for OBDII code B1738 KIA can vary depending on the extent of the issue and the availability of replacement parts. It is advisable to consult with a mechanic to get an accurate estimate of the repair time.
10. Can I reset the OBDII code B1738 KIA by disconnecting the battery?
Disconnecting the battery may reset the ECU and temporarily clear the OBDII code B1738 KIA, but the issue may return if the underlying problem with the front driver's pressure-side impact sensor is not addressed. It is best to have the issue diagnosed and repaired by a professional.
Discuss the causes and fixes for B1738 KIA OBDII Code
Code B1738 KIA comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.