B1702 KIA Code - Driver Buckle Pretensioner Resistance Too Low
Quick Answer
The B1702 KIA diagnostic trouble code indicates that the driver buckle pretensioner in the vehicle is registering a resistance that is lower than the expected value. Common causes include Faulty driver buckle pretensioner, Wiring issues or poor electrical connections, Corrosion or damage to the pretensioner sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1702 KIA indicates Driver Buckle Pretensioner Resistance Too Low.
- Common causes
- Common causes include Faulty driver buckle pretensioner, Wiring issues or poor electrical connections, Corrosion or damage to the pretensioner sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1702 KIA Description
The B1702 KIA diagnostic trouble code indicates that the driver buckle pretensioner in the vehicle is registering a resistance that is lower than the expected value. The driver buckle pretensioner is a crucial safety component that is responsible for tightening the seatbelt in the event of a collision, ensuring the driver is securely restrained. When the resistance is too low, it may indicate a fault in the system that could potentially compromise the effectiveness of the seatbelt pretensioner in a crash.
Common Causes of B1702 KIA
- Faulty driver buckle pretensioner.
- Wiring issues or poor electrical connections.
- Corrosion or damage to the pretensioner sensor.
- Impact or damage to the seatbelt assembly.
- Issues with the vehicle's electrical system.
Symptoms of B1702 KIA
- Illumination of the airbag warning light on the dashboard.
- Audible warning chime indicating a problem with the seatbelt system.
- Inability to properly secure the seatbelt or feeling of looseness.
- Increased sensitivity of the seatbelt warning system.
How to Fix B1702 KIA
- Diagnose the specific cause of the low resistance in the driver buckle pretensioner using a diagnostic scanner.
- Inspect the wiring and electrical connections for any signs of damage or corrosion.
- Test the resistance of the pretensioner sensor and replace if necessary.
- Replace the driver buckle pretensioner if it is found to be faulty.
- Clear the diagnostic trouble code and perform a test drive to ensure the issue has been resolved.
Cost to Fix B1702 KIA
The cost of repairing a B1702 KIA code can vary depending on the specific cause of the issue and the labor rates at the auto repair shop. Typically, the parts for a driver buckle pretensioner replacement can range from $100 to $300, while the labor costs can be between $100 and $200. Overall, the total repair cost for this issue may range from $200 to $500. It is recommended to obtain quotes from local auto repair shops to get a more accurate estimate based on your vehicle make and model. Labor rates can vary widely, so it is advisable to inquire about rates before proceeding with the repair.
Need more information about the B1702 KIA code?
Need more information on how to fix the B1702 KIA code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1702 KIA code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1702 KIA Code
1. What are the common symptoms of OBDII code B1702 in a KIA related to the driver buckle pretensioner resistance being too low?
The common symptoms include the airbag warning light illuminating on the dashboard and a potential failure of the driver's seatbelt pretensioner system.
2. What are the possible causes of OBDII code B1702 in a KIA indicating that the driver buckle pretensioner resistance is too low?
Possible causes may include a faulty seatbelt buckle pretensioner, damaged wiring or connectors in the pretensioner circuit, or a malfunctioning airbag control module.
3. How can I diagnose OBDII code B1702 in a KIA for the driver buckle pretensioner resistance being too low?
Diagnosis involves using a compatible OBDII scanner to retrieve the fault codes, inspecting the seatbelt pretensioner components for damage, and testing the wiring and connectors for continuity and proper resistance levels.
4. Can I continue driving my KIA with OBDII code B1702 indicating low driver buckle pretensioner resistance?
It is not recommended to drive the vehicle with this issue as it can compromise the effectiveness of the seatbelt pretensioner system in the event of a collision.
5. How can I repair OBDII code B1702 in a KIA due to low driver buckle pretensioner resistance?
Repair options include replacing the faulty driver buckle pretensioner, repairing damaged wiring or connectors, or reprogramming/resetting the airbag control module to clear the code.
6. Are there any safety risks associated with OBDII code B1702 in a KIA related to low driver buckle pretensioner resistance?
Yes, there are safety risks as the seatbelt pretensioner may not function correctly in a collision, potentially increasing the risk of injury to the driver.
7. Can resetting the OBDII code B1702 in a KIA resolve the issue of low driver buckle pretensioner resistance?
Resetting the code may temporarily clear the warning light, but the underlying issue causing the low resistance should still be diagnosed and repaired to ensure proper functioning of the seatbelt pretensioner.
8. Is it possible to prevent OBDII code B1702 from occurring in a KIA due to low driver buckle pretensioner resistance?
Regular maintenance checks, avoiding excessive strain on the seatbelt system, and promptly addressing any airbag warning lights can help prevent this issue from occurring.
9. How much does it typically cost to repair OBDII code B1702 in a KIA related to low driver buckle pretensioner resistance?
The cost of repair can vary depending on the specific cause of the issue, but it may involve parts and labor costs ranging from $100 to $500 or more, depending on the extent of the repair needed.
10. Can a DIY enthusiast fix OBDII code B1702 in a KIA indicating low driver buckle pretensioner resistance?
While some basic diagnosis and repairs can be done by DIY enthusiasts, it is recommended to consult a professional technician for proper diagnosis and repair of issues related to the airbag and seatbelt pretensioner systems to ensure safety and effectiveness.
Discuss the causes and fixes for B1702 KIA OBDII Code
Code B1702 KIA comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.