Engine-CodesScion – B1697 Scion

B1697 Scion Code - Lost Communication with Door Side Airbag Sensor Left

Quick Answer

The B1697 diagnostic trouble code (DTC) for Scion vehicles indicates that there is a communication failure between the vehicle's electronic control module (ECM) and the door side airbag sensor located on the left side of the vehicle. Common causes include Faulty door side airbag sensor left, Wiring or connector issues between the sensor and ECM, ECM malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1697 Scion indicates Lost Communication with Door Side Airbag Sensor Left.
Common causes
Common causes include Faulty door side airbag sensor left, Wiring or connector issues between the sensor and ECM, ECM malfunction.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 14, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B1697 Scion Description

The B1697 diagnostic trouble code (DTC) for Scion vehicles indicates that there is a communication failure between the vehicle's electronic control module (ECM) and the door side airbag sensor located on the left side of the vehicle. This sensor is responsible for detecting impacts or collisions on the left side of the vehicle and triggering the deployment of the side airbag to protect the occupants in case of a crash.

OBDII Code B1697 Scion - Lost Communication with Door Side Airbag Sensor Left
B1697 Scion Code - Lost Communication with Door Side Airbag Sensor Left

Common Causes of B1697 Scion

  1. Faulty door side airbag sensor left.
  2. Wiring or connector issues between the sensor and ECM.
  3. ECM malfunction.
  4. Corrosion or damage to the sensor or wiring.
  5. Electrical interference or communication bus issues.

Symptoms of B1697 Scion

  1. Airbag warning light illuminated on the dashboard.
  2. Inability to deploy the left side airbag in a collision.
  3. Loss of communication with the left side airbag sensor.
  4. Possible triggering of other related airbag system fault codes.

How to Fix B1697 Scion

  1. Begin by conducting a thorough visual inspection of the wiring and connectors between the door side airbag sensor and the ECM. Look for any signs of damage, corrosion, or loose connections.
  2. Test the door side airbag sensor left using a multimeter to check for proper resistance and continuity. Replace the sensor if it fails the test.
  3. Check the ECM for any fault codes related to communication issues with the door side airbag sensor. Clear the codes and retest to see if the issue persists.
  4. If the problem persists, perform a diagnostic scan tool test to identify the exact nature of the communication failure and address it accordingly.
  5. Once the issue is identified and repaired, clear the DTC and test the vehicle to ensure that the communication between the ECM and the door side airbag sensor left is restored.

Cost to Fix B1697 Scion

The typical repair costs for addressing the B1697 DTC can vary depending on the specific cause of the issue. In general, replacing a faulty door side airbag sensor left can cost between $200 and $400, including parts and labor. However, if the issue is related to wiring or ECM problems, the repair costs may increase accordingly. It's important to consult with a qualified mechanic or dealership to get an accurate estimate based on the specific diagnosis and repair needed. Keep in mind that labor rates can vary between different auto repair shops, so it's advisable to inquire about rates in your area for a more precise cost estimate.

Need more information about the B1697 Scion code?

Need more information on how to fix the B1697 Scion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1697 Scion code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1697 Scion Code

1. What are the common symptoms of OBDII code B1697 in a Scion related to lost communication with the door side airbag sensor on the left side?

- Common symptoms include the airbag warning light illuminating on the dashboard, inoperative left side airbag, and potential failure to deploy the airbag in case of an accident.

2. What are the possible causes of OBDII code B1697 in a Scion indicating lost communication with the door side airbag sensor on the left side?

- Causes may include a faulty door side airbag sensor on the left side, damaged wiring or connectors, a blown fuse, or a malfunction in the airbag control module.

3. How can I diagnose the issue causing OBDII code B1697 in my Scion related to lost communication with the left door side airbag sensor?

- To diagnose the problem, you can use an OBDII scanner to read the code, visually inspect the wiring and connectors for damage, and test the door side airbag sensor for proper functionality.

4. What steps can I take to repair OBDII code B1697 in my Scion due to lost communication with the left door side airbag sensor?

- Repair steps may involve replacing the faulty door side airbag sensor on the left side, repairing or replacing damaged wiring and connectors, checking and replacing any blown fuses, or reprogramming the airbag control module.

5. Is it safe to continue driving my Scion with OBDII code B1697 indicating lost communication with the left door side airbag sensor?

- It is recommended to address the issue promptly to ensure the proper functioning of the airbag system in case of an accident. Continuing to drive with this issue unresolved may compromise the safety of the vehicle occupants.

6. Can I reset the OBDII code B1697 in my Scion without fixing the underlying issue?

- While you can clear the code using an OBDII scanner, it is important to address the root cause of the problem to prevent the code from reappearing and ensure the proper operation of the airbag system.

7. How much does it typically cost to repair OBDII code B1697 in a Scion involving lost communication with the left door side airbag sensor?

- The cost of repair can vary depending on the specific cause of the issue. It may range from a few hundred to a thousand dollars, including parts and labor.

8. Can a DIY enthusiast with automotive knowledge fix OBDII code B1697 related to lost communication with the left door side airbag sensor in a Scion?

- Depending on the exact cause of the problem, some DIY repairs like checking and replacing fuses or connectors may be possible. However, for more complex issues like sensor replacement or module reprogramming, professional help may be required.

9. Are there any recalls or technical service bulletins related to OBDII code B1697 in Scion vehicles with issues concerning the left door side airbag sensor?

- It is recommended to check with the manufacturer or authorized dealerships for any recalls or technical service bulletins related to this specific OBDII code in Scion vehicles to see if there are any known issues or remedies available.

10. How can I prevent OBDII code B1697 from occurring in my Scion due to lost communication with the left door side airbag sensor in the future?

- Regular maintenance and inspection of the airbag system, including wiring and sensors, can help prevent issues like lost communication with the door side airbag sensor. Addressing any warning lights or abnormal behavior promptly can also help prevent more serious problems.

Discuss the causes and fixes for B1697 Scion OBDII Code

Code B1697 Scion comments

No comments found for this page.