B1695 Scion Code - Door Side Airbag Sensor Left Malfunction
Quick Answer
The B1695 diagnostic trouble code for Scion vehicles indicates a malfunction in the left door side airbag sensor. Common causes include Wiring issues such as damaged or corroded wires, Sensor damage due to impact or moisture intrusion, Electronic component failure within the sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1695 Scion indicates Door Side Airbag Sensor Left Malfunction.
- Common causes
- Common causes include Wiring issues such as damaged or corroded wires, Sensor damage due to impact or moisture intrusion, Electronic component failure within the sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1695 Scion Description
The B1695 diagnostic trouble code for Scion vehicles indicates a malfunction in the left door side airbag sensor. This sensor is responsible for detecting impacts or collisions on the left side of the vehicle and triggering the deployment of the side airbag to provide additional protection for the occupants. When this sensor malfunctions, it can compromise the effectiveness of the side airbag system, potentially putting the occupants at greater risk in the event of a side impact collision.
Common Causes of B1695 Scion
- Wiring issues such as damaged or corroded wires
- Sensor damage due to impact or moisture intrusion
- Electronic component failure within the sensor
- Faulty airbag control module
- Issues with the vehicle's computer system
Symptoms of B1695 Scion
- Airbag warning light illuminated on the dashboard
- Inability to turn off the airbag warning light
- Fault codes related to the left door side airbag sensor in the vehicle's computer system
- Side airbag system not deploying in a collision
How to Fix B1695 Scion
- Begin by diagnosing the exact cause of the malfunction by using a scan tool to read the trouble codes stored in the vehicle's computer system.
- Inspect the wiring harness and sensor for any visible damage or corrosion. Repair or replace any damaged components as needed.
- Test the sensor's functionality using a multimeter to check for proper resistance values.
- If the sensor is found to be faulty, replace it with a new one and ensure proper calibration.
- Clear the trouble codes from the vehicle's computer system and test the airbag system to ensure proper functionality.
Cost to Fix B1695 Scion
The cost of repairing a door side airbag sensor left malfunction can vary depending on the specific cause of the issue and the cost of parts and labor. Typically, the cost of replacing a faulty sensor can range from $200 to $500, including parts and labor. Additional costs may be incurred if wiring repairs or other components need to be replaced. It is advisable to consult with a professional mechanic or auto repair shop for a more accurate estimate based on the specific circumstances of the vehicle.
Need more information about the B1695 Scion code?
Need more information on how to fix the B1695 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1695 Scion code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1695 Scion Code
1. What are the common symptoms of OBDII code B1695 in a Scion related to the Door Side Airbag Sensor Left Malfunction?
The common symptoms include the airbag warning light illuminating on the dashboard and a potential message indicating an issue with the door side airbag sensor on the left side.
2. What are some possible causes of the Door Side Airbag Sensor Left Malfunction (B1695) in a Scion?
Potential causes of this issue may include a faulty door side airbag sensor, wiring or connection problems, or a malfunction in the airbag control module.
3. How can I diagnose the Door Side Airbag Sensor Left Malfunction in my Scion with the OBDII code B1695?
Diagnosis typically involves using a professional OBDII scanner to retrieve the specific code (B1695), checking the wiring and connections to the left side airbag sensor, and testing the sensor itself for proper functionality.
4. Can I continue driving my Scion with the B1695 code related to the Door Side Airbag Sensor Left Malfunction?
It is not recommended to drive the vehicle with an active airbag system fault, as it may affect the proper deployment of the airbags in case of an accident. It is advisable to address the issue promptly.
5. How can I repair the Door Side Airbag Sensor Left Malfunction (B1695) in my Scion?
Repair options may include replacing the faulty door side airbag sensor, repairing any damaged wiring or connections, or resetting the airbag control module after fixing the underlying problem.
6. Is it possible to reset the OBDII code B1695 related to the Door Side Airbag Sensor Left Malfunction without fixing the issue?
Resetting the code without addressing the root cause may temporarily turn off the warning light, but the issue will likely reoccur. It is crucial to diagnose and repair the problem to ensure proper airbag functionality.
7. Are there any safety concerns associated with the Door Side Airbag Sensor Left Malfunction in a Scion?
Yes, a malfunctioning airbag sensor can compromise the effectiveness of the side airbag system in the event of a collision, potentially putting occupants at risk. Prompt attention to the issue is essential for safety.
8. Can a DIY enthusiast with basic automotive knowledge fix the B1695 code related to the Door Side Airbag Sensor Left Malfunction?
While some DIYers may be able to address simple wiring or connection issues, working on the airbag system requires caution and expertise due to safety concerns. It is advisable to consult a professional for proper diagnosis and repair.
9. How much does it typically cost to repair the Door Side Airbag Sensor Left Malfunction in a Scion?
The cost of repair can vary depending on the specific cause of the issue, the parts needed for replacement, and labor charges. It is recommended to obtain quotes from reputable automotive repair shops for an accurate estimate.
10. Will fixing the Door Side Airbag Sensor Left Malfunction (B1695) reset the airbag warning light in my Scion?
Once the underlying issue causing the malfunction is resolved and the system is reset, the airbag warning light should turn off. If the light persists, further diagnosis may be necessary to ensure the problem is fully resolved.
Discuss the causes and fixes for B1695 Scion OBDII Code
Code B1695 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.