B1695 2014 Toyota RAV4 Code - Door Side Airbag Sensor Left Malfunction
Quick Answer
The B1695 diagnostic trouble code (DTC) for a 2014 Toyota RAV4 indicates a malfunction in the Door Side Airbag Sensor on the left side of the vehicle. Common causes include Wiring issues in the door side airbag sensor circuit, Physical damage to the door side airbag sensor, Faulty door side airbag sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1695 2014 Toyota RAV4 indicates Door Side Airbag Sensor Left Malfunction.
- Common causes
- Common causes include Wiring issues in the door side airbag sensor circuit, Physical damage to the door side airbag sensor, Faulty door side airbag sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1695 2014 Toyota RAV4 Description
The B1695 diagnostic trouble code (DTC) for a 2014 Toyota RAV4 indicates a malfunction in the Door Side Airbag Sensor on the left side of the vehicle. This sensor is responsible for detecting impacts or collisions on the left side of the vehicle and triggering the deployment of the side airbag to protect occupants in the event of a crash. When this sensor malfunctions, it can compromise the effectiveness of the side airbag system, potentially putting passengers at risk in the event of a side impact collision.
Common Causes of B1695 2014 Toyota RAV4
- Wiring issues in the door side airbag sensor circuit
- Physical damage to the door side airbag sensor
- Faulty door side airbag sensor
- Corrosion or contamination in the sensor connectors
- Impact or collision that damaged the sensor or wiring
Symptoms of B1695 2014 Toyota RAV4
- Airbag warning light illuminated on the dashboard
- Left side airbag system not deploying during a crash
- Diagnostic trouble code B1695 stored in the vehicle's computer
- Inconsistent or erratic behavior of the airbag system
How to Fix B1695 2014 Toyota RAV4
- Begin by diagnosing the issue using a professional automotive scan tool to retrieve the specific DTC B1695 and identify the exact cause of the malfunction.
- Inspect the wiring harness and sensor connectors for any damage, corrosion, or contamination. Repair or replace any damaged components as necessary.
- Test the door side airbag sensor for proper functionality using a multimeter or other appropriate diagnostic tools. Replace the sensor if it is found to be faulty.
- Clear the DTC from the vehicle's computer memory using the scan tool and perform a test drive to ensure that the issue has been resolved.
- If the repair process is beyond your expertise, it is recommended to seek assistance from a qualified automotive technician to properly diagnose and repair the door side airbag sensor malfunction.
Cost to Fix B1695 2014 Toyota RAV4
The typical repair costs for addressing a Door Side Airbag Sensor Left Malfunction (code B1695) in a 2014 Toyota RAV4 can vary depending on the exact cause of the issue and the parts and labor required for the repair. On average, the cost of replacing a faulty door side airbag sensor can range from $200 to $500, including parts and labor. However, it is essential to note that specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It is advisable to check local rates for a more precise estimate before proceeding with the repair.
Need more information about the B1695 2014 Toyota RAV4 code?
Need more information on how to fix the B1695 2014 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1695 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1695 2014 Toyota RAV4 Code
What does OBDII code B1695 mean for a 2014 Toyota RAV4?
OBDII code B1695 indicates a malfunction in the left door side airbag sensor, which may affect the deployment of the airbag in that area during a collision.
What are the common symptoms associated with code B1695?
Common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the airbag system, which may fail to deploy properly in an accident.
What could cause code B1695 to trigger?
Potential causes include a faulty left door side airbag sensor, damaged wiring or connectors, or issues with the airbag control module.
Can I drive my 2014 Toyota RAV4 with code B1695?
While you can technically drive the vehicle, it is not safe to do so since the airbag system may not function correctly in the event of a collision.
How can I diagnose code B1695?
To diagnose code B1695, use an OBDII scanner to confirm the code, inspect the left door area for visible damage, and test the airbag sensor and wiring for faults.
What repairs are needed for code B1695?
Repairs may involve replacing the left door side airbag sensor, repairing or replacing damaged wiring or connectors, or resetting the airbag control module.
Is it safe to reset the code B1695?
Resetting the code may temporarily turn off the warning light, but it’s important to address the underlying issue to ensure the airbag system is functioning correctly.
How much does it typically cost to fix code B1695?
Repair costs can vary widely depending on the specific issue, but fixing or replacing the airbag sensor can range from $100 to $500 or more, depending on labor and parts.
Can I fix code B1695 myself?
If you have experience with automotive repairs, you may be able to diagnose and replace the sensor or wiring. However, due to the safety implications, it's often best to consult a professional mechanic.
Discuss the causes and fixes for B1695 2014 Toyota RAV4 OBDII Code
Code B1695 2014 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.