B1635 2018 Toyota RAV4 Code - Rear Airbag Sensor Left Circuit Malfunction
Quick Answer
The B1635 diagnostic trouble code (DTC) for a 2018 Toyota RAV4 indicates a Rear Airbag Sensor Left Circuit Malfunction. Common causes include Faulty rear airbag sensor, Wiring issues or a loose connection in the circuit, Corrosion or damage to the sensor or wiring. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1635 2018 Toyota RAV4 indicates Rear Airbag Sensor Left Circuit Malfunction.
- Common causes
- Common causes include Faulty rear airbag sensor, Wiring issues or a loose connection in the circuit, Corrosion or damage to the sensor or wiring.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1635 2018 Toyota RAV4 Description
The B1635 diagnostic trouble code (DTC) for a 2018 Toyota RAV4 indicates a Rear Airbag Sensor Left Circuit Malfunction. This code specifically refers to an issue with the sensor responsible for detecting impacts or collisions on the left side of the vehicle that would trigger the deployment of the rear airbag. The rear airbag sensor plays a critical role in ensuring the safety of occupants in the event of a rear-end collision, as it helps determine the severity of the impact and whether the airbags need to be deployed.
Common Causes of B1635 2018 Toyota RAV4
- Faulty rear airbag sensor.
- Wiring issues or a loose connection in the circuit.
- Corrosion or damage to the sensor or wiring.
- Malfunctioning airbag control module.
Symptoms of B1635 2018 Toyota RAV4
- Airbag warning light illuminated on the dashboard.
- Rear airbags failing to deploy in a rear-end collision.
- Inconsistent or erratic behavior of the rear airbag system.
- Diagnostic trouble code stored in the vehicle's computer system.
How to Fix B1635 2018 Toyota RAV4
- Begin by conducting a thorough visual inspection of the rear airbag sensor and its wiring harness to check for any visible damage, corrosion, or loose connections.
- Use a multimeter to test the continuity of the sensor circuit and ensure that the sensor is receiving the proper voltage.
- If the sensor is deemed faulty, replace it with a new, OEM-approved sensor.
- Clear the diagnostic trouble code from the vehicle's computer system using a scan tool.
- Perform a test drive to ensure that the rear airbag system is functioning correctly and that the airbag warning light has been extinguished.
Cost to Fix B1635 2018 Toyota RAV4
The cost of repairing a Rear Airbag Sensor Left Circuit Malfunction on a 2018 Toyota RAV4 can vary depending on the specific cause of the issue and the cost of parts and labor. Typically, replacing a faulty rear airbag sensor can range from $200 to $500, depending on the sensor's quality and brand. Labor costs can add an additional $100 to $200 to the total repair bill. It's essential to factor in the diagnostic time and labor rates at your local auto repair shop when estimating the total cost of this repair.
Tech Notes for B1635 2018 Toyota RAV4
Need more information about the B1635 2018 Toyota RAV4 code?
Need more information on how to fix the B1635 2018 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1635 2018 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1635 2018 Toyota RAV4 Code
1. What are the common symptoms of OBDII code B1635 on a 2018 Toyota RAV4?
The common symptoms of OBDII code B1635 on a 2018 Toyota RAV4 include the airbag warning light staying on, potential issues with the rear airbag system, and possible loss of functionality in the left rear airbag sensor.
2. What could cause the Rear Airbag Sensor Left Circuit Malfunction code B1635 on a 2018 Toyota RAV4?
The code B1635 on a 2018 Toyota RAV4 is typically caused by a faulty rear airbag sensor, damaged wiring or connectors in the left circuit, or issues with the airbag control module.
3. How can I diagnose the Rear Airbag Sensor Left Circuit Malfunction on my 2018 Toyota RAV4?
Diagnosing OBDII code B1635 on a 2018 Toyota RAV4 involves using a diagnostic scanner to read the fault codes, inspecting the rear airbag sensor and its wiring for any visible damage, and testing the sensor's electrical connections.
4. Can I still drive my 2018 Toyota RAV4 with the Rear Airbag Sensor Left Circuit Malfunction code B1635?
It is not recommended to drive your 2018 Toyota RAV4 with the B1635 code, as it indicates a malfunction in the left rear airbag sensor circuit, which could compromise the safety of the airbag system in the event of a crash.
5. How can I repair the Rear Airbag Sensor Left Circuit Malfunction on my 2018 Toyota RAV4?
To repair the B1635 code on a 2018 Toyota RAV4, you may need to replace the faulty rear airbag sensor, repair any damaged wiring or connectors in the left circuit, or reset the airbag control module after fixing the issue.
6. Is the Rear Airbag Sensor Left Circuit Malfunction a common problem in 2018 Toyota RAV4 vehicles?
While the B1635 code may not be extremely common in 2018 Toyota RAV4 vehicles, issues with airbag sensors and circuits can occur due to various factors like wear and tear, accidents, or electrical faults.
7. Can I reset the OBDII code B1635 on my 2018 Toyota RAV4 without fixing the underlying issue?
Resetting the B1635 code without addressing the underlying issue, such as a malfunctioning rear airbag sensor or damaged wiring, may temporarily clear the code but will not resolve the root cause of the problem.
8. Will fixing the Rear Airbag Sensor Left Circuit Malfunction on my 2018 Toyota RAV4 be costly?
The cost of fixing the B1635 code on a 2018 Toyota RAV4 can vary depending on the specific issue causing the malfunction, the parts needed for repair, and whether you choose to do the repair yourself or take it to a professional mechanic.
9. How long does it typically take to repair the Rear Airbag Sensor Left Circuit Malfunction on a 2018 Toyota RAV4?
The time required to repair the B1635 code on a 2018 Toyota RAV4 can vary based on the extent of the issue, availability of parts, and your level of experience with automotive repairs. It may take a few hours to a full day for diagnosis and repair.
10. Can a DIY enthusiast fix the Rear Airbag Sensor Left Circuit Malfunction on a 2018 Toyota RAV4?
While some DIY enthusiasts may have the skills and tools to fix the B1635 code on a 2018 Toyota RAV4, working on airbag systems can be complex and potentially dangerous. It is recommended to consult a professional if you are unsure about handling airbag-related repairs.
Discuss the causes and fixes for B1635 2018 Toyota RAV4 OBDII Code
Code B1635 2018 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.