B1630 Toyota Code - Rear Airbag Sensor Right Circuit Malfunction

Quick Answer

The B1630 code for Toyota vehicles indicates a Rear Airbag Sensor Right Circuit Malfunction. Common causes include Faulty rear airbag sensor, Damaged wiring or connectors in the airbag circuit, Corrosion or water damage affecting the sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means

B1630 Toyota indicates Rear Airbag Sensor Right Circuit Malfunction.

Common causes

Common causes include Faulty rear airbag sensor, Damaged wiring or connectors in the airbag circuit, Corrosion or water damage affecting the sensor.

Severity

High - diagnose this code as soon as possible.

Can I drive?

Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

• Description
• Common Causes
• Symptoms
• How To Fix
• Cost to Fix
• FAQs
• Comments
• Add Comment

Common Causes of B1630 Toyota

Symptoms of B1630 Toyota

How to Fix B1630 Toyota

Cost to Fix B1630 Toyota

Need more information about the B1630 Toyota code?

Need more information on how to fix the B1630 Toyota code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1630 Toyota code diagnosed by a professional: Find a repair shop in your area

Information for Specific Toyota Models

• B1630 2013 Toyota RAV4 — Rear Airbag Sensor Right Circuit Malfunction
• B1630 2014 Toyota RAV4 — Rear Airbag Sensor Right Circuit Malfunction
• B1630 2015 Toyota RAV4 — Rear Airbag Sensor Right Circuit Malfunction
• B1630 2016 Toyota RAV4 — Rear Airbag Sensor Right Circuit Malfunction
• B1630 2017 Toyota RAV4 — Rear Airbag Sensor Right Circuit Malfunction
• B1630 2018 Toyota RAV4 — Rear Airbag Sensor Right Circuit Malfunction

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

• Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
• Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
• Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
• Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1630 Toyota Code

1. What are the common symptoms of OBDII code B1630 Toyota (Rear Airbag Sensor Right Circuit Malfunction)?

The common symptoms include the airbag warning light illuminating on the dashboard and a potential failure of the right rear airbag system.

2. What are the possible causes of the B1630 error code in a Toyota vehicle?

Potential causes include a faulty rear airbag sensor on the right side, damaged wiring or connectors in the airbag system, or a malfunction in the airbag control module.

3. How can I diagnose the Rear Airbag Sensor Right Circuit Malfunction in my Toyota?

Diagnosis typically involves using an OBDII scanner to retrieve the specific error code, inspecting the wiring and connectors for damage, and testing the rear airbag sensor for proper functioning.

4. Can I continue driving my Toyota with the B1630 error code present?

It is not recommended to drive the vehicle with an active airbag system malfunction as it can compromise your safety in the event of an accident. Prompt diagnosis and repair are advised.

5. Is it possible to reset the B1630 error code in a Toyota without fixing the issue?

Resetting the error code without addressing the underlying problem will likely result in the code reappearing once the system performs a self-check. It is crucial to fix the issue causing the code.

6. Are there any DIY repair tips for fixing the Rear Airbag Sensor Right Circuit Malfunction?

DIY repair may involve checking and repairing damaged wiring or connectors, ensuring proper sensor alignment, and clearing any obstructions that may affect sensor function. However, professional diagnosis is recommended for safety-critical systems like airbags.

7. How much does it cost to repair the B1630 error code in a Toyota?

The cost of repair can vary depending on the specific issue causing the code, the labor rates in your area, and whether any parts need replacement. It's advisable to obtain quotes from reputable mechanics or dealerships.

8. Can a local mechanic or auto shop fix the Rear Airbag Sensor Right Circuit Malfunction in my Toyota?

Yes, a qualified mechanic or auto shop with experience in airbag system repairs should be able to diagnose and repair the issue. Ensure they have the necessary tools and expertise for working on safety-critical systems.

9. Will fixing the B1630 code require replacing the rear airbag sensor in my Toyota?

In some cases, replacing the rear airbag sensor on the right side may be necessary to resolve the circuit malfunction. However, proper diagnosis is crucial to confirm the exact cause of the error code.

10. How long does it typically take to repair the Rear Airbag Sensor Right Circuit Malfunction in a Toyota?

The repair time can vary depending on the complexity of the issue, availability of parts, and the mechanic's expertise. In general, it may take a few hours to a day to diagnose and fix the B1630 error code.