B1628 Scion Code - Side Airbag Sensor Assembly Left Initialization Incomplete
Quick Answer
The B1628 diagnostic trouble code (DTC) indicates that there is an issue with the initialization of the left side airbag sensor assembly in a Scion vehicle. Common causes include Faulty left side airbag sensor assembly, Poor electrical connections or damaged wiring harnesses related to the airbag system, Software issues within the airbag control module (ACM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1628 Scion indicates Side Airbag Sensor Assembly Left Initialization Incomplete.
- Common causes
- Common causes include Faulty left side airbag sensor assembly, Poor electrical connections or damaged wiring harnesses related to the airbag system, Software issues within the airbag control module (ACM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1628 Scion Description
The B1628 diagnostic trouble code (DTC) indicates that there is an issue with the initialization of the left side airbag sensor assembly in a Scion vehicle. This code is part of the airbag system's diagnostic monitoring, which is crucial for ensuring passenger safety during a collision. When this code is triggered, it signifies that the vehicle's onboard diagnostic system has detected that the left side airbag sensor assembly has not completed its initialization process.
Common Causes of B1628 Scion
- Faulty left side airbag sensor assembly.
- Poor electrical connections or damaged wiring harnesses related to the airbag system.
- Software issues within the airbag control module (ACM).
- Previous collision damage that has not been properly repaired.
- Corrosion or dirt affecting the sensor's ability to function correctly.
Symptoms of B1628 Scion
- Airbag warning light illuminated on the dashboard.
- Inconsistent airbag deployment during system self-checks.
- Vehicle may exhibit erratic behavior in other safety systems, such as traction control or stability control.
- Possible loss of function in the left side airbag during a collision.
- Diagnostic scanner may show additional codes related to the airbag system.
How to Fix B1628 Scion
- Diagnostic Scan: Begin by using an OBD-II scanner to confirm the presence of the B1628 code and check for any additional codes that may provide more context regarding the issue.
- Visual Inspection: Conduct a thorough visual inspection of the left side airbag sensor assembly, wiring harness, and connectors for any signs of damage, corrosion, or loose connections.
- Sensor Replacement: If the sensor is found to be faulty, replace the left side airbag sensor assembly with a new, OEM (Original Equipment Manufacturer) part to ensure compatibility and reliability.
- Clear Codes and Reinitialize: After repairs, clear the diagnostic trouble codes using the scanner and perform the necessary initialization procedure for the airbag system as per the manufacturer’s specifications.
- Test Drive and Verification: Conduct a test drive to verify that the airbag warning light remains off and that the airbag system is functioning correctly during self-checks.
Cost to Fix B1628 Scion
The cost to repair the B1628 code can vary significantly based on the specific issue and location. On average, the cost for parts and labor may range from $200 to $800. This estimate includes the cost of a new left side airbag sensor assembly, which typically ranges from $100 to $400, and labor costs that can vary between $80 and $150 per hour. The total labor time for this repair may take approximately 1 to 3 hours, depending on the complexity of the issue and the shop's efficiency. It's important to note that labor rates can differ based on geographic location, vehicle make and model, and whether the repair is performed at a dealership or an independent shop. Therefore, it is advisable to check local rates for a more precise estimate.
Need more information about the B1628 Scion code?
Need more information on how to fix the B1628 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1628 Scion code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1628 Scion Code
1. What are the common symptoms of OBDII code B1628 in a Scion related to the Side Airbag Sensor Assembly Left Initialization Incomplete?
- Common symptoms include the airbag warning light illuminated on the dashboard and a potential failure of the left side airbag system.
2. What could cause the Side Airbag Sensor Assembly Left Initialization Incomplete code B1628 in a Scion?
- The code B1628 may be triggered by a disconnected, damaged, or faulty left side airbag sensor assembly or wiring.
3. How can I diagnose the Side Airbag Sensor Assembly Left Initialization Incomplete code B1628 in my Scion?
- Diagnosis involves inspecting the left side airbag sensor assembly, checking for wiring issues, and using a diagnostic scanner to read and clear the error code.
4. Is it safe to drive my Scion with the OBDII code B1628 indicating Side Airbag Sensor Assembly Left Initialization Incomplete?
- It is not recommended to drive the vehicle with an unresolved airbag system issue. Addressing the problem promptly is crucial for safety.
5. What are the repair options for fixing the Side Airbag Sensor Assembly Left Initialization Incomplete code B1628 in a Scion?
- Repair options include reconnecting or replacing the left side airbag sensor assembly, repairing any damaged wiring, and resetting the airbag system using a diagnostic tool.
6. Can I reset the OBDII code B1628 related to Side Airbag Sensor Assembly Left Initialization Incomplete in my Scion without professional help?
- While you can attempt to clear the code with a diagnostic scanner, it is advisable to have the underlying issue diagnosed and repaired by a qualified technician.
7. Are there any recalls or technical service bulletins related to the B1628 code in Scion vehicles?
- Check with your local Scion dealership or visit the National Highway Traffic Safety Administration (NHTSA) website for information on any recalls or bulletins related to this specific OBDII code.
8. How much can I expect to pay for repairing the Side Airbag Sensor Assembly Left Initialization Incomplete code B1628 in my Scion?
- Repair costs can vary depending on the extent of the issue, parts needed, and labor rates. It is recommended to obtain quotes from reputable repair shops for an accurate estimate.
9. Will fixing the B1628 code require reprogramming or reinitializing the airbag system in my Scion?
- Depending on the repair performed, reprogramming or reinitializing the airbag system may be necessary to ensure proper functionality and to clear the error code.
10. How can I prevent the recurrence of the Side Airbag Sensor Assembly Left Initialization Incomplete code B1628 in my Scion?
- Regularly inspecting and maintaining the airbag system, avoiding impacts to the left side of the vehicle, and addressing any warning lights promptly can help prevent the reoccurrence of this code.
Discuss the causes and fixes for B1628 Scion OBDII Code
Code B1628 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.