B1627 Toyota Code - Lost Communication With Side Airbag Sensor Left
Quick Answer
The B1627 diagnostic trouble code (DTC) for Toyota vehicles indicates that there is a communication issue with the side airbag sensor located on the left side of the vehicle. Common causes include Damaged wiring harness or connectors leading to the side airbag sensor, Faulty side airbag sensor on the left side of the vehicle, Communication error within the vehicle's airbag control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1627 Toyota indicates Lost Communication With Side Airbag Sensor Left.
- Common causes
- Common causes include Damaged wiring harness or connectors leading to the side airbag sensor, Faulty side airbag sensor on the left side of the vehicle, Communication error within the vehicle's airbag control module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1627 Toyota Description
The B1627 diagnostic trouble code (DTC) for Toyota vehicles indicates that there is a communication issue with the side airbag sensor located on the left side of the vehicle. This sensor plays a crucial role in detecting a side impact and deploying the side airbag to protect the occupants in the event of a collision. When communication is lost with this sensor, it can compromise the functionality of the side airbag system, potentially putting occupants at risk in the event of a side impact.
Common Causes of B1627 Toyota
- Damaged wiring harness or connectors leading to the side airbag sensor
- Faulty side airbag sensor on the left side of the vehicle
- Communication error within the vehicle's airbag control module
- Corrosion or debris affecting the connections to the side airbag sensor
- Impact or collision that may have damaged the side airbag sensor or wiring
Symptoms of B1627 Toyota
- Illumination of the airbag warning light on the dashboard
- Inability to deploy the left side airbag in a side collision
- Diagnostic trouble code B1627 stored in the vehicle's onboard computer
- Communication error message displayed on the vehicle's information screen
How to Fix B1627 Toyota
- Begin by performing a thorough visual inspection of the wiring harness and connectors leading to the side airbag sensor. Look for any signs of damage, corrosion, or loose connections.
- Use a multimeter to test the continuity and resistance of the wiring harness to ensure that there are no open circuits or shorts.
- Inspect the side airbag sensor for any physical damage or signs of malfunction. Replace the sensor if necessary.
- Clear the diagnostic trouble code from the vehicle's onboard computer using a compatible scan tool.
- Test the functionality of the side airbag system by conducting a system check and ensuring that the left side airbag deploys properly in a controlled environment.
Cost to Fix B1627 Toyota
The typical repair costs for addressing a B1627 code on a Toyota vehicle can vary depending on the specific cause of the communication loss with the side airbag sensor. In general, the cost of parts such as a new side airbag sensor and any necessary wiring harnesses can range from $200 to $500. Labor costs for diagnosing and repairing the issue can add an additional $100 to $300 to the total repair bill.
Need more information about the B1627 Toyota code?
Need more information on how to fix the B1627 Toyota code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1627 Toyota code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1627 Toyota Code
1. What are common symptoms of OBDII code B1627 Toyota (Lost Communication With Side Airbag Sensor Left)?
The common symptoms include the airbag warning light illuminating on the dashboard and possible disabling of the side airbag system.
2. What are the possible causes of OBDII code B1627 Toyota?
Possible causes include a faulty side airbag sensor on the left side, damaged wiring or connectors leading to the sensor, or an issue with the airbag control module.
3. How can I diagnose the issue related to OBDII code B1627 Toyota?
Diagnosing the issue involves using a diagnostic scan tool to retrieve the specific trouble code, inspecting the wiring and connectors for damage, and testing the side airbag sensor for proper functionality.
4. Can I still drive my vehicle with OBDII code B1627 Toyota present?
It is not recommended to drive the vehicle with this code present, as it may indicate a problem with the side airbag system, which is crucial for occupant safety in the event of a side impact collision.
5. How can I repair OBDII code B1627 Toyota?
Repairing the code typically involves addressing the underlying issue causing the communication failure with the side airbag sensor left, which may include replacing the sensor, repairing damaged wiring, or reprogramming the airbag control module.
6. Is it safe to attempt repairs related to OBDII code B1627 Toyota on my own?
It is recommended to have repairs related to airbag systems performed by a qualified technician or at an authorized service center, as improper handling can lead to accidental airbag deployment or other safety hazards.
7. Can a low battery voltage cause OBDII code B1627 Toyota to trigger?
Yes, low battery voltage or an electrical system issue can sometimes lead to communication errors with sensors, including the side airbag sensor left, triggering the B1627 code.
8. How can I prevent OBDII code B1627 Toyota from reoccurring?
Regular maintenance of the vehicle's electrical system, including checking and cleaning connectors and ensuring proper battery voltage, can help prevent communication issues that trigger the B1627 code.
9. Will disconnecting the battery reset OBDII code B1627 Toyota?
Disconnecting the battery may reset the code temporarily, but if the underlying issue causing the communication failure with the side airbag sensor left is not addressed, the code is likely to reoccur.
10. Is OBDII code B1627 Toyota a serious issue?
Yes, OBDII code B1627 Toyota indicating a lost communication with the side airbag sensor left is a serious safety concern that should be addressed promptly to ensure the proper functioning of the vehicle's airbag system in the event of a collision.
Discuss the causes and fixes for B1627 Toyota OBDII Code
Code B1627 Toyota comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.