Engine-CodesScion – B1625 Scion

B1625 Scion Code - Side Airbag Sensor Left Circuit Malfunction

Quick Answer

The B1625 Scion code indicates a malfunction in the circuit of the side airbag sensor located on the left side of the vehicle. Common causes include Damaged wiring or connectors in the side airbag sensor circuit, A faulty side airbag sensor, Corrosion or poor connections in the sensor circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1625 Scion indicates Side Airbag Sensor Left Circuit Malfunction.
Common causes
Common causes include Damaged wiring or connectors in the side airbag sensor circuit, A faulty side airbag sensor, Corrosion or poor connections in the sensor circuit.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 15, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B1625 Scion Description

The B1625 Scion code indicates a malfunction in the circuit of the side airbag sensor located on the left side of the vehicle. The side airbag sensor is a crucial component of the vehicle's safety system, responsible for detecting impacts or collisions on the left side of the vehicle and triggering the deployment of the side airbag to protect the occupants. When this sensor circuit malfunctions, it can compromise the effectiveness of the side airbag system, potentially putting the vehicle's occupants at risk in the event of a side impact.

OBDII Code B1625 Scion - Side Airbag Sensor Left Circuit Malfunction
B1625 Scion Code - Side Airbag Sensor Left Circuit Malfunction

Common Causes of B1625 Scion

  1. Damaged wiring or connectors in the side airbag sensor circuit.
  2. A faulty side airbag sensor.
  3. Corrosion or poor connections in the sensor circuit.
  4. Issues with the airbag control module.
  5. Impact or collision that damaged the side airbag sensor.

Symptoms of B1625 Scion

  1. Airbag warning light illuminated on the dashboard.
  2. Inability to turn off the airbag warning light even after resetting.
  3. Intermittent or non-deployment of the side airbag during a collision.
  4. Diagnostic trouble codes related to the side airbag system stored in the vehicle's computer.
  5. Loss of communication with the side airbag sensor module.

How to Fix B1625 Scion

  1. Begin by diagnosing the specific cause of the circuit malfunction using a scan tool to retrieve the trouble codes and pinpoint the issue.
  2. Inspect the wiring and connectors in the side airbag sensor circuit for any damage, corrosion, or loose connections. Repair or replace as necessary.
  3. Test the side airbag sensor for proper functionality and replace it if found to be faulty.
  4. Check the airbag control module for any issues and replace if necessary.
  5. Clear the trouble codes from the vehicle's computer and perform a test to ensure the side airbag system is functioning correctly.

Cost to Fix B1625 Scion

The cost of repairing a B1625 Scion code can vary depending on the specific cause of the issue and the labor rates at the auto repair shop. On average, the repair costs for this type of issue can range from $200 to $500, including parts and labor. However, it is important to note that labor rates can vary significantly based on location, vehicle make and model, and the expertise of the technician. It is advisable to contact local auto repair shops for a more accurate estimate based on your specific circumstances.

Need more information about the B1625 Scion code?

Need more information on how to fix the B1625 Scion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1625 Scion code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1625 Scion Code

1. What are the common symptoms of OBDII code B1625 in a Scion related to the Side Airbag Sensor Left Circuit Malfunction?

- Common symptoms include the airbag warning light staying illuminated on the dashboard, potential disabling of the side airbag system, and diagnostic trouble codes related to the left side airbag sensor circuit.

2. What are the possible causes of the Side Airbag Sensor Left Circuit Malfunction (B1625) in a Scion?

- Potential causes can include faulty wiring or connectors in the left side airbag sensor circuit, a malfunctioning side airbag sensor, or issues with the airbag control module.

3. How can I diagnose the Side Airbag Sensor Left Circuit Malfunction in my Scion if I encounter OBDII code B1625?

- Diagnosis typically involves using a professional OBDII scanner to read and interpret the specific trouble code, inspecting the wiring and connectors in the left side airbag sensor circuit, and testing the sensor itself for proper function.

4. Is it safe to drive my Scion with the OBDII code B1625 indicating a Side Airbag Sensor Left Circuit Malfunction?

- It is recommended to address the issue promptly to ensure the proper functioning of the side airbag system. Driving with the airbag system compromised may pose a safety risk in the event of a collision.

5. Can I reset the OBDII code B1625 related to the Side Airbag Sensor Left Circuit Malfunction in my Scion by disconnecting the battery?

- While disconnecting the battery may clear the code temporarily, it is crucial to diagnose and repair the underlying issue causing the malfunction to ensure the safety features of the side airbag system are fully operational.

6. Are there any common DIY repair tips for fixing the Side Airbag Sensor Left Circuit Malfunction in a Scion with OBDII code B1625?

- DIY repair tips may include carefully inspecting and securing the wiring and connectors in the left side airbag sensor circuit, checking for any visible damage, and ensuring proper connection to the sensor and airbag control module.

7. Do I need specialized tools to repair the OBDII code B1625 related to the Side Airbag Sensor Left Circuit Malfunction in my Scion?

- While basic tools may be sufficient for inspecting wiring and connectors, diagnosing and repairing the specific components of the side airbag system may require specialized tools and knowledge best handled by a professional technician.

8. How much can I expect to pay for repairing the Side Airbag Sensor Left Circuit Malfunction in my Scion triggering OBDII code B1625?

- Repair costs can vary depending on the exact cause of the malfunction, parts needed for replacement, and labor charges. It is advisable to obtain quotes from reputable repair shops or dealerships for an accurate estimate.

9. Will fixing the OBDII code B1625 Scion Side Airbag Sensor Left Circuit Malfunction require replacing the entire side airbag system?

- Not necessarily. In many cases, the issue may be resolved by repairing or replacing specific components such as wiring, connectors, or the side airbag sensor itself without the need to replace the entire system.

10. Can the OBDII code B1625 related to the Side Airbag Sensor Left Circuit Malfunction in my Scion be intermittent or sporadic?

- Yes, intermittent faults in the left side airbag sensor circuit can sometimes trigger the B1625 code sporadically. It is essential to address such issues promptly to ensure the consistent operation of the side airbag system.

Discuss the causes and fixes for B1625 Scion OBDII Code

Code B1625 Scion comments

No comments found for this page.