B160F JEEP Possible Causes
- Faulty Sun Sensor
- Sun Sensor harness is open or shorted
- Sun Sensor circuit poor electrical connection
- Faulty Heating Ventilation and Air Conditioning (HVAC) A/C Heater Module
How do I fix code B160F JEEP
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
B160F JEEP Tech NotesB160F-11 TWILIGHT/AMBIENT LIGHT SENSOR INPUT CIRCUIT SHORT TO GROUND
B160F-12 TWILIGHT/AMBIENT LIGHT SENSOR CIRCUIT SHORT TO BATTERY
B160F-92 TWILIGHT/AMBIENT LIGHT SENSOR INPUT PERFORMANCE OR INCORRECT OPERATION
Cost of diagnosing the B160F JEEP code
Labor: 1.0The cost of diagnosing the B160F JEEP code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
B160F JEEP Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B160F JEEP MeaningThe Heating Ventilation and Air Conditioning (HVAC) A/C Heater Module uses a variety of sensors to adjust HVAC operation to obtain optimal performance. These sensors are continuously monitored by the A/C Heater Module to assure that they are in range. If those sensors fall out of predetermined ranges a Diagnostic Trouble Code (DTC) will set. If the A/C Heater Module detects on the Auto Headlamps Signal circuit a voltage less than 0.25 volts for the period of two seconds or more. This DTC has a de-maturing time of 20 msec. If the DTCs status changes from active to stored, the DTC will stay in memory for 100 ignition cycles.
B160F JEEP More InformationNeed more information on how to fix the B160F JEEP code?
Get Access to Factory Service Manuals