B1591 CHEVROLET - Mirror Vertical Position Sensor Voltage
B1591 CHEVROLET Possible Causes
- Faulty Left Mirror or Right Mirror
- Left Mirror or Right Mirror harness is open or shorted
- Left Mirror or Right Mirror circuit poor electrical connection
How do I fix code B1591 CHEVROLET
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the B1591 CHEVROLET code
Labor: 1.0The cost of diagnosing the B1591 CHEVROLET code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
B1591 CHEVROLET Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B1591 CHEVROLET MeaningThe Left Mirror and the Right Mirror Vertical Position Sensors are Potentiometers. The Driver Door Module (DDM) and the Passenger Door Module (PFDM) determine the vertical position of the mirrors based on the signal voltage from these sensors. The code will be set when the signal voltage of the mirror vertical position sensor is above or below the range limits, within 10%, for 30 seconds in the requested position. The voltage range limits depend upon what the actual voltage of the 5 volt reference circuit is, and will vary from vehicle to vehicle and from module to module.
B1591 CHEVROLET More InformationNeed more information on how to fix the B1591 CHEVROLET code?
Get Access to Factory Service Manuals