Engine-Codes - Mercury - B1507 MERCURY

B1507 MERCURY - Flash To Pass Switch Circuit Failure

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3  What is this?
Table of contents

B1507 MERCURY Possible Causes

  • Faulty Headlamp Switch
  • Headlamp Switch harness is open or shorted
  • Headlamp Switch circuit poor electrical connection
  • Faulty Smart Junction Box (SJB)

How is the B1507 MERCURY code repair?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

What is the cost to diagnose the B1507 MERCURY code

Labor: 1.0

The cost to diagnose the B1507 MERCURY code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
How much do you know about cars?

Take the AutoCodes.com automotive tests and turbo-charge your car repair knowledge

Play Now

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

B1507 MERCURY Meaning

The Smart Junction Box (SJB) sends reference signals to the headlamp switch through circuits. When the headlamp switch is placed in the HEADLAMPS ON position, the voltage signal is routed to ground through the circuit. If the SJB detects a fault with the headlamp switch inputs, the SJB turns the exterior lamps on by default. When the SJB detects the headlamp switch in the HEADLAMPS ON position and the multifunction switch in the LOW BEAM position, the SJB sends voltage through circuits to the low beam headlamps. When the SJB detects the headlamp switch in the HEADLAMPS ON position and the multifunction switch in the HIGH BEAM position, the SJB sends voltage through circuits to the high beam headlamps. The SJB sends a reference signal to the multifunction switch through circuits CLF27 (GN/BN) and CLF17 (WH/OG). When the multifunction switch is placed in the FLASH-TO-PASS or HIGH BEAM position, the voltage signal is routed to ground. When the SJB detects a request for the flash-to-pass, the SJB sends voltage to the high beam headlamps. The OBDII codes when the SJB detects a short to ground from the flash-to-pass input circuit.

More Information

Need more information on how to fix the B1507 MERCURY code?
Get Access to Factory Service Manuals

Need more help?

Get the B1507 Mercury code diagnosed by a professional: Find a repair shop in your area