B14BE DODGE - Channel 10 Audio Speaker Output
B14BE DODGE Possible Causes
- Faulty Audio Amplifier
- Audio Amplifier harness is open or shorted
- Audio Amplifier circuit poor electrical connection
How is the B14BE DODGE code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
B14BE-11 CHANNEL 10 AUDIO SPEAKER OUTPUT CIRCUIT SHORT TO GROUND
B14BE-12 CHANNEL 10 AUDIO SPEAKER OUTPUT CIRCUIT SHORT TO BATTERY
B14BE-13 CHANNEL 10 AUDIO SPEAKER OUTPUT CIRCUIT OPEN
B14BE-92 CHANNEL 10 AUDIO SPEAKER OUTPUT PERFORMANCE OR INCORRECT OPERATION
What is the cost to diagnose the B14BE DODGE code
Labor: 1.0The cost to diagnose the B14BE DODGE code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
B14BE DODGE MeaningThe amplifier receives fused battery current from a fuse in the Power Distribution Center (PDC) at all times. The internal circuitry of the amplifier switches the amplifier on based upon a CAN-I bus message that is received from the Radio Receiver Module (RRM) whenever the RRM is turned on. The amplifier receives the sound signal inputs from the left and right rear outputs of the RRM, and then sends the amplified speaker outputs for each of those channels to the speakers.
The amplifier receives information from the Body Control Module (BCM) and RRM, that communicates the correct channel setting for optimum speaker sound and output.
There are two amplifiers available, an 8 channel, rated at 322 watts (7 channels are used) and a 12 channel (11 channels are used), rated at 506 watts.
More InformationNeed more information on how to fix the B14BE DODGE code?
Get Access to Factory Service Manuals