B1482 RAM Code - Channel 7 Audio Speaker Output Circuit Shorted Together
|B1482 RAM code possible causes
- Faulty Audio Amplifier
- Audio Amplifier harness is open or shorted
- Audio Amplifier circuit poor electrical connection
|How is the B1482 RAM code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|What is the cost to diagnose the B1482 RAM code
Labor: 1.0The cost to diagnose the B1482 RAM code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What are B1482 RAM code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
|What is B1482 RAM code meaning?The amplifier receives fused battery current from a fuse in the Power Distribution Center (PDC) at all times. The internal circuitry of the amplifier switches the amplifier on based upon a CAN-I bus message that is received from the Radio Receiver Module (RRM) whenever the RRM is turned on. The amplifier receives the sound signal inputs from the left and right rear outputs of the RRM, and then sends the amplified speaker outputs for each of those channels to the speakers.
The amplifier receives information from the Body Control Module (BCM) and RRM, that communicates the correct channel setting for optimum speaker sound and output.
There are two amplifiers available, an 8 channel, rated at 322 watts (7 channels are used) and a 12 channel (11 channels are used), rated at 506 watts.
|Need more information with the B1482 RAM code?Need more information on how to fix the B1482 RAM code?
Get Access to Factory Service Manuals