B1441:04 Code - Control Module Ignition OFF, Run, and Start Circuit Short to Ground
Quick Answer
The B1441:04 diagnostic trouble code indicates that there is a short to ground in the control module ignition OFF, run, and start circuit. Common causes include Wiring or harness damage, Faulty control module, Corrosion in the circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1441:04 indicates Control Module Ignition OFF, Run, and Start Circuit Short to Ground.
- Common causes
- Common causes include Wiring or harness damage, Faulty control module, Corrosion in the circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1441:04 Description
The B1441:04 diagnostic trouble code indicates that there is a short to ground in the control module ignition OFF, run, and start circuit. This means that there is an abnormal connection between the control module and ground when the ignition is turned OFF, during the RUN cycle, and when starting the vehicle. This issue can lead to various problems with the vehicle's electrical systems, potentially causing issues with starting the engine, loss of power, and other malfunctions.
Common Causes of B1441:04
- Wiring or harness damage.
- Faulty control module.
- Corrosion in the circuit.
- Poor connections or loose wiring.
- Issues with the ignition switch.
Symptoms of B1441:04
- Engine cranks but does not start.
- Engine stalling or rough idle.
- Loss of power while driving.
- Illumination of the check engine light.
- Electrical issues such as malfunctioning lights or accessories.
How to Fix B1441:04
- Perform a visual inspection of the wiring and harness to locate any damage. Repair or replace as needed.
- Check the control module for any signs of damage or malfunction. Replace if necessary.
- Clean any corrosion in the circuit and ensure proper connections.
- Test the ignition switch for proper functioning. Replace if faulty.
- Clear the trouble codes and test the vehicle to ensure the issue is resolved.
Cost to Fix B1441:04
The cost of repairing a control module ignition OFF, run, and start circuit short to ground can vary depending on the specific cause of the issue. In general, the cost of parts for this repair can range from $100 to $500, with labor costs adding an additional $100 to $200. This brings the total estimated cost to $200 to $700. However, it's important to note that labor rates and part prices can vary, so it's advisable to obtain quotes from local auto repair shops for a more accurate estimate.
Tech Notes for B1441:04
B1441:04 Control Module Ignition OFF, Run, and Start Circuit Short to Ground or Open
Need more information about the B1441:04 code?
Need more information on how to fix the B1441:04 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1441:04 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1441:04 Code
1. What does OBDII code B1441:04 mean?
Code B1441:04 indicates a short to ground in the control module ignition OFF, Run, and Start circuit, which can disrupt proper electrical communication and system operation.
2. What are the common symptoms of code B1441:04?
Symptoms may include failure to start the vehicle, intermittent electrical issues, warning lights on the dashboard, or accessories not functioning properly.
3. What causes code B1441:04 to appear?
This code is often caused by damaged wiring, a short to ground in the ignition circuit, a faulty ignition switch, or a malfunctioning control module.
4. How can I diagnose code B1441:04?
Start by inspecting the wiring and connectors for damage or corrosion, check for short circuits with a multimeter, and test the ignition switch and related components for proper function.
5. Can I drive my car with code B1441:04 active?
It’s not recommended to drive with this code active, as it can lead to starting issues or unexpected electrical problems that may compromise safety.
6. How do I fix code B1441:04?
Repairs often involve repairing or replacing damaged wiring, replacing a faulty ignition switch, or addressing issues with the control module.
7. How much does it cost to repair code B1441:04?
The repair cost varies depending on the specific issue but can range from $100 for minor wiring fixes to over $500 if a control module needs replacement.
8. Can a dead battery cause code B1441:04?
A dead or weak battery itself is unlikely to cause this code, but low voltage can exacerbate electrical issues, so ensure the battery is fully charged and functioning.
9. Is code B1441:04 specific to certain car brands?
While the code format is standardized under OBDII, the exact meaning and affected systems can vary slightly depending on the manufacturer, so always refer to the vehicle’s service manual.
10. Do I need a professional to fix code B1441:04?
If you’re skilled with electrical diagnostics and have the proper tools, you may attempt the repair. However, for complex issues, a professional mechanic is recommended.
Discuss the causes and fixes for B1441:04 OBDII Code
Code B1441:04 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.