Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
B1419:11 Driver Side Restraints Sensor 2 Circuit Short to Ground
B1419:93 Driver Side Restraints Sensor 2 No Operation
The cost to diagnose the B1419 LINCOLN code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
The Restraint Control Module (RCM) monitors the driver front door and RH C-pillar side impact sensors and circuits for the following faults: Open circuit, Short to voltage, Short to ground, Faulted driver front door side impact sensor, Faulted RH C-pillar side impact sensor. If a fault is detected, the RCM stores DTC B1419 in memory and sends a message to the Instrument Panel Cluster (IPC) to illuminate the airbag warning indicator. The RCM communicates with each impact sensor. If the RCM is unable to communicate with the sensor, a Diagnostic Trouble Code (DTC) is stored in memory. A Continuous Memory Diagnostic Trouble Code (CMDTC) no operation can be set by a short to voltage on the return circuit of the impact sensor.
Need more information on how to fix the B1419 LINCOLN code?
Get Access to Factory Service Manuals
Get the b1419 lincoln code diagnosed by a professional: Find a repair shop in your area