B1413 LEXUS Code - Evaporator Temperature Sensor Circuit
|B1413 LEXUS code possible causes
- Faulty Evaporator Temperature Sensor
- Evaporator Temperature Sensor harness is open or shorted
- Evaporator Temperature Sensor circuit poor electrical connection
- Faulty Air Conditioning Amplifier
|How is the B1413 LEXUS code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|What is the cost to diagnose the B1413 LEXUS code
Labor: 1.0The cost to diagnose the B1413 LEXUS code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What are B1413 LEXUS code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
|What is B1413 LEXUS code meaning?The No. 1 cooler thermistor (evaporator temperature sensor) is installed on the evaporator in the air conditioning unit to detect the temperature of the cooled air that has passed through the evaporator and to control the air conditioner. It sends signals to the air conditioning amplifier. The signals change in accordance with the resistance of the No. 1 cooler thermistor (evaporator temperature sensor). As the temperature decreases, the resistance increases. As the temperature increases, the resistance decreases. The air conditioning amplifier applies a voltage (5 V) to the No. 1 cooler thermistor (evaporator temperature sensor) and reads voltage changes as changes in the resistance of the No. 1 cooler thermistor (evaporator temperature sensor). This sensor is used for frost prevention.
|Need more information with the B1413 LEXUS code?Need more information on how to fix the B1413 LEXUS code?
Get Access to Factory Service Manuals