Engine-Codes
 
OBDII Code List
 
B1395 CADILLAC

B1395 CADILLAC - Control Module Voltage Reference Output Circuit Voltage

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3  What does this mean?

B1395 CADILLAC Possible Causes

  • Faulty Heating, Ventilation, and Air Conditioning (HVAC) Control Module
  • Heating, Ventilation, and Air Conditioning (HVAC) Control Module harness is open or shorted
  • Heating, Ventilation, and Air Conditioning (HVAC) Control Module circuit poor electrical connection

First diagnose B1395 CADILLAC code

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.

B1395 CADILLAC Tech Notes

B1395 03: Control Module Voltage Reference Output Circuit Voltage Below Threshold
B1395 07: Control Module Voltage Reference Output Circuit Voltage Above Threshold

Cost of diagnosing the B1395 CADILLAC code

    Labor: 1.0

    The cost of diagnosing the B1395 CADILLAC code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

B1395 CADILLAC Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

B1395 CADILLAC Meaning

The windscreen temperature and inside moisture sensor integrates the relative humidity sensor, windscreen temperature sensor and humidity sensing element temperature sensor. This sensor assembly provides information about relative humidity level on inside windscreen, temperature of the inside windscreen and temperature of the humidity sensor element.

The relative humidity sensor measures the relative humidity on the compartment side of the windscreen. It also detects the temperature of the windscreen surface on the compartment side. Both values are used as control inputs for the Heating, Ventilation, and Air Conditioning (HVAC) Control Module application to calculate the fog risk on windscreen compartment side and ability to reduce fuel consumption by decreasing A/C compressor power to a minimum without causing any fog. The sensor will also enable partial recirculation mode in order to improve heat-up performance of the passenger compartment under cold ambient temperature conditions without the risk of mist build-up on the windscreen. The humidity sensor element temperature sensor supplies the temperature of the humidity sensor element. It is only needed if the thermal contact between the humidity sensing element and the inside windscreen surface is not sufficient.

OBDII Code B1395 CADILLAC - Control Module Voltage Reference Output Circuit Voltage - Engine-Codes.com

B1395 CADILLAC More Information

Need more information on how to fix the B1395 CADILLAC code?
Get Access to Factory Service Manuals

Related Information