B1379 OLDSMOBILE - Ignition 3 Fault
B1379 OLDSMOBILE Possible Causes
- Faulty Body Control Module (BCM)
- Body Control Module (BCM) harness is open or shorted
- Body Control Module (BCM) circuit poor electrical connection
- Faulty Instrument Panel Cluster (IPC)
How do I fix code B1379 OLDSMOBILE?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the B1379 OLDSMOBILE code
Labor: 1.0The cost of diagnosing the B1379 OLDSMOBILE code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
B1379 OLDSMOBILE MeaningThe Diagnostic Trouble Code (DTC) B1379 will set if IGNITION 3 is not active after IGNITION 1 has been active for 20 seconds. When DTC is present, SERVICE VEHICLE SOON indicator illuminates and check gauges chime will sound. A current DTC B1379 will clear when the fault is no longer present and the ignition switch is cycled. A history DTC B1379 clears when module ignition cycle counter reaches reset threshold, without a repeat of malfunction.
B1379 OLDSMOBILE More InformationNeed more information on how to fix the B1379 OLDSMOBILE code?
Get Access to Factory Service Manuals