B1379 GMC Code - Ignition 3 Fault
Quick Answer
The B1379 GMC code refers to an ignition 3 fault, indicating a problem with the ignition system in the vehicle. Common causes include Faulty ignition coil, Worn-out spark plug, Damaged ignition wiring. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1379 GMC indicates Ignition 3 Fault.
- Common causes
- Common causes include Faulty ignition coil, Worn-out spark plug, Damaged ignition wiring.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1379 GMC Description
The B1379 GMC code refers to an ignition 3 fault, indicating a problem with the ignition system in the vehicle. The ignition system is responsible for generating the spark that ignites the air-fuel mixture in the engine's cylinders, allowing the vehicle to start and run. Ignition 3 specifically refers to the third ignition coil or cylinder in the firing order of the engine.
Common Causes of B1379 GMC
- Faulty ignition coil
- Worn-out spark plug
- Damaged ignition wiring
- ECM/PCM failure
- Poor electrical connections
Symptoms of B1379 GMC
- Rough idling or engine misfires
- Decreased acceleration and power
- Poor fuel economy
- Difficulty starting the engine
- Illuminated check engine light
How to Fix B1379 GMC
- Use a scan tool to retrieve the trouble codes and determine the exact cause of the ignition 3 fault.
- Inspect the ignition coil, spark plug, and wiring for any damage or wear.
- Replace the faulty ignition coil or spark plug if necessary.
- Repair any damaged wiring or connectors in the ignition system.
- Clear the trouble codes from the ECM/PCM and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix B1379 GMC
The typical repair costs for addressing an ignition 3 fault can range from $150 to $400, including parts and labor. However, the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It's advisable to check local rates for a more precise estimate.
Need more information about the B1379 GMC code?
Need more information on how to fix the B1379 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1379 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1379 GMC Code
1. What are the common symptoms of OBDII code B1379 GMC (Ignition 3 Fault)?
The common symptoms include engine misfires, rough idling, difficulty starting the vehicle, and reduced engine performance.
2. What are the possible causes of the Ignition 3 Fault (B1379) code in a GMC vehicle?
Possible causes include faulty ignition coils, damaged spark plugs, wiring issues in the ignition system, or a malfunctioning ignition control module.
3. How can I diagnose the Ignition 3 Fault (B1379) code in my GMC vehicle?
To diagnose this code, you can use an OBDII scanner to read the error codes, visually inspect the ignition system components, test the ignition coils and spark plugs, and check the wiring for any damage or loose connections.
4. Can a bad battery cause the Ignition 3 Fault (B1379) code to appear?
Yes, a weak or faulty battery can cause voltage fluctuations that may trigger the Ignition 3 Fault code. It is recommended to check the battery and charging system as part of the diagnostic process.
5. How can I repair the Ignition 3 Fault (B1379) code in my GMC vehicle?
Repairing this code may involve replacing faulty ignition coils, spark plugs, or the ignition control module, repairing damaged wiring, or addressing any underlying issues causing the fault.
6. Is it safe to continue driving with the Ignition 3 Fault (B1379) code present?
It is not recommended to drive with the Ignition 3 Fault code present, as it can lead to engine performance issues and potential damage to other components. It is best to address the issue promptly.
7. Can a DIY enthusiast fix the Ignition 3 Fault (B1379) code, or should it be done by a professional mechanic?
Depending on your skill level and access to tools, a DIY enthusiast may be able to address the Ignition 3 Fault code by following repair guides and using proper diagnostic procedures. However, if you are unsure, it is best to consult a professional mechanic.
8. Will resetting the OBDII system clear the Ignition 3 Fault (B1379) code?
Resetting the OBDII system may temporarily clear the code, but if the underlying issue causing the fault is not addressed, the code is likely to reappear. It is important to diagnose and repair the root cause of the problem.
9. Can extreme weather conditions affect the appearance of the Ignition 3 Fault (B1379) code?
Extreme weather conditions, such as very high or low temperatures, can sometimes exacerbate existing issues in the ignition system and trigger the Ignition 3 Fault code. Ensuring your vehicle is properly maintained can help prevent such occurrences.
10. How much does it typically cost to repair the Ignition 3 Fault (B1379) code in a GMC vehicle?
The cost of repairing the Ignition 3 Fault code can vary depending on the specific cause of the issue, the labor rates in your area, and the parts needed for the repair. It is advisable to obtain quotes from reputable mechanics or repair shops for an accurate estimate.
Discuss the causes and fixes for B1379 GMC OBDII Code
Code B1379 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.