B1369 CHEVROLET - Ignition 0 Fault
B1369 CHEVROLET Possible Causes
- Faulty Body Control Module (BCM)
- Body Control Module (BCM) harness is open or shorted
- Body Control Module (BCM) circuit poor electrical connection
- Faulty Instrument Panel Cluster (IPC)
How is the B1369 CHEVROLET code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
What is the cost to diagnose the B1369 CHEVROLET code
Labor: 1.0The cost to diagnose the B1369 CHEVROLET code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
B1369 CHEVROLET MeaningThe Diagnostic Trouble Code (DTC) B1369 will set if IGNITION 0 input is not active after IGNITION 3 input has been active for 20 seconds with the engine running. When DTC is present, multiple indicators on the instrument panel will illuminate and the vehicle will not start. A current DTC B1369 will clear when the fault is no longer present and the ignition switch is cycled. A history DTC B1369 clears when module ignition cycle counter reaches reset threshold, without a repeat of malfunction.
More InformationNeed more information on how to fix the B1369 CHEVROLET code?
Get Access to Factory Service Manuals