B1349 GMC Code - Driver Front Airbag Short to Battery
Quick Answer
The B1349 GMC code indicates that there is a short circuit between the driver front airbag and the battery. Common causes include Damaged wiring or connectors in the airbag system, Faulty airbag module, Corrosion in the electrical connections. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1349 GMC indicates Driver Front Airbag Short to Battery.
- Common causes
- Common causes include Damaged wiring or connectors in the airbag system, Faulty airbag module, Corrosion in the electrical connections.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1349 GMC Description
The B1349 GMC code indicates that there is a short circuit between the driver front airbag and the battery. In vehicles equipped with airbags, this is a critical safety issue that must be addressed promptly. The driver front airbag is a crucial component of the vehicle's supplemental restraint system (SRS), designed to deploy in the event of a collision to protect the driver from impact. A short to battery in the airbag system can prevent the airbag from deploying when needed, compromising the safety of the driver in the event of a crash.
Common Causes of B1349 GMC
- Damaged wiring or connectors in the airbag system.
- Faulty airbag module.
- Corrosion in the electrical connections.
- Impact or damage to the front of the vehicle.
- Faulty clockspring in the steering column.
Symptoms of B1349 GMC
- Airbag warning light illuminated on the dashboard.
- The horn may not function properly.
- The SRS system may display an error message on the instrument cluster.
- The airbag system may fail to deploy in a crash.
How to Fix B1349 GMC
- Diagnose the issue using a scan tool to retrieve the specific fault code and identify the location of the short circuit.
- Inspect the wiring harness and connectors for any damage or corrosion. Repair or replace any damaged components.
- Check the airbag module for faults and replace if necessary.
- Test the repaired system to ensure that the airbag warning light is no longer illuminated and that the airbag system functions correctly.
- Clear the fault code from the vehicle's computer system to reset the airbag system.
Cost to Fix B1349 GMC
The cost of repairing a B1349 GMC code can vary depending on the extent of the damage and the specific components that need to be replaced. In general, the cost of replacing a damaged wiring harness or connector can range from $100 to $300, while replacing an airbag module can cost between $200 and $600. Labor costs can also add to the total repair bill, with rates typically ranging from $80 to $150 per hour. It's important to consult with a professional mechanic to get an accurate estimate based on the specific circumstances of your vehicle.
Need more information about the B1349 GMC code?
Need more information on how to fix the B1349 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1349 GMC code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1349 GMC Code
1. What are the common symptoms of OBDII code B1349 GMC (Driver Front Airbag Short to Battery)?
- The common symptoms include the airbag warning light illuminating on the dashboard, potential non-deployment of the driver front airbag in the event of a collision, and diagnostic trouble code B1349 stored in the vehicle's computer system.
2. What are the possible causes of OBDII code B1349 GMC?
- Possible causes of this code may include a short circuit in the wiring harness leading to the driver front airbag, a faulty airbag module, a malfunctioning clockspring, or issues with the airbag system's control unit.
3. How can I diagnose OBDII code B1349 GMC?
- Diagnosis typically involves using a professional OBDII scanner to retrieve the specific trouble code, inspecting the wiring harness and connectors related to the driver front airbag, and conducting a thorough visual inspection of the airbag system components.
4. What are the recommended repair tips for OBDII code B1349 GMC?
- Repair tips may include repairing or replacing damaged wiring, replacing the driver front airbag module if necessary, checking and replacing the clockspring if faulty, and resetting the airbag system after repairs are completed.
5. Is it safe to drive with OBDII code B1349 GMC active?
- It is not recommended to drive the vehicle with an active B1349 trouble code, as it indicates a potential issue with the driver front airbag system, which could compromise the safety of the driver in the event of a collision.
6. Can I reset OBDII code B1349 GMC on my own?
- While you can attempt to reset the code using an OBDII scanner, it is important to address the underlying issue causing the code to prevent it from reoccurring. If the problem persists, it is advisable to seek professional assistance.
7. How much does it cost to repair OBDII code B1349 GMC?
- The cost of repairing this code can vary depending on the specific cause of the issue, the extent of the damage, and the labor rates of the repair shop. It is advisable to obtain quotes from different mechanics for an accurate estimate.
8. Are there any recalls related to OBDII code B1349 GMC?
- It is recommended to check with the manufacturer or authorized dealership for any recalls related to OBDII code B1349 GMC, as some vehicle models may have been subject to recall campaigns addressing airbag system issues.
9. Can a DIY enthusiast repair OBDII code B1349 GMC at home?
- While some basic troubleshooting and repairs may be possible for DIY enthusiasts, dealing with airbag systems can be complex and dangerous. It is recommended to consult a qualified mechanic or technician for proper diagnosis and repair.
10. How can I prevent OBDII code B1349 GMC from occurring in the future?
- To prevent this code from occurring in the future, it is essential to perform regular maintenance checks on the airbag system, address any warning lights promptly, and follow the manufacturer's recommended service schedule for the vehicle.
Discuss the causes and fixes for B1349 GMC OBDII Code
Code B1349 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.