B1334 BUICK Possible Causes
- Faulty Right Air Temperature Switch Assembly
- Right Air Temperature Switch Assembly harness is open or shorted
- Right Air Temperature Switch Assembly circuit poor electrical connection
- Faulty Instrument Panel Integration Module (IPM)
How do I fix code B1334 BUICK
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the B1334 BUICK code
Labor: 1.0The cost of diagnosing the B1334 BUICK code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
B1334 BUICK Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B1334 BUICK MeaningThe right air temperature switch assembly is a sliding potentiometer with detents that correspond to fixed resistance values. The Instrument Panel Integration Module (IPM) supplies 5 volts to the right air temperature switch signal circuit and provides a low reference circuit. The IPM determines which switch position has been selected by the voltage drop across the corresponding resistance value. The OBDII code sets when the IPM detects that the right air temperature switch signal circuit is less than 0.09 volts (5 counts) or greater than 4.90 volts (250 counts).
B1334 BUICK More InformationNeed more information on how to fix the B1334 BUICK code?
Get Access to Factory Service Manuals