B1328 PONTIAC - Right Sunload Sensor
B1328 PONTIAC Possible Causes
- Faulty Right Sunload Sensor
- Right Sunload Sensor harness is open or shorted
- Right Sunload Sensor circuit poor electrical connection
- Faulty Instrument Panel Module (IPM)
How is the B1328 PONTIAC code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
What is the cost to diagnose the B1328 PONTIAC code
Labor: 1.0The cost to diagnose the B1328 PONTIAC code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
B1328 PONTIAC MeaningThe Instrument Panel Module (IPM) monitors ambient light with the left and right sunload sensors. The sunload sensors are an infrared light sensitive photodiode. The IPM supplies 5 volts to the sunload sensors signal circuit and provides a low reference circuit. As the light shining upon the sensor gets brighter, the sensor conductance increases. The sensor signal decreases as the conductance increases. The IPM uses this information to compensate for the effect of the sun on the inside air temperature of the vehicle. The IPM converts the voltage values to count values where one volt is approximately equal to 51 counts.
More InformationNeed more information on how to fix the B1328 PONTIAC code?
Get Access to Factory Service Manuals