B1317 LINCOLN Code - Battery Voltage High
|B1317 LINCOLN code possible causes
- Battery defective
- Loose or missing alternator drive belt
- Faulty Alternator
- Alternator harness is open or shorted
- Alternator circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
|How is the B1317 LINCOLN code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|B1317 LINCOLN code tech notesAccording to the 1996 Ford Explorer factory service manual, the B1317 and B1318 codes depend on which module the code was generated.
Four-Wheel Antilock Brake (4WABS) Control Module: Antilock Brake System Problem
Generic Electronic Module (GEM): Battery Voltage High
Automatic Ride Control (ARC) Module: Suspension Control (Automatic - Electronic Level)
Generic Electronic Module (GEM): Battery Voltage Low
|What is the cost to diagnose the B1317 LINCOLN code
Labor: 1.0The cost to diagnose the B1317 LINCOLN code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What are B1317 LINCOLN code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
|What is B1317 LINCOLN code meaning?With the engine running, the charging system supplies voltage to the battery and the vehicle electrical system through the battery B+ cable. The voltage that is supplied to the vehicle electrical system is used for the operation of the various vehicle systems and modules. Many modules monitor this voltage and if it rises above or below their calibrated setpoints, a Diagnostic Trouble Code (DTC) sets.
|Need more information with the B1317 LINCOLN code?Need more information on how to fix the B1317 LINCOLN code?
Get Access to Factory Service Manuals