B130C LINCOLN Code - Load Shed Control Circuit Short
|B130C LINCOLN code possible causes
- Faulty Trailer Battery Charge Relay
- Trailer Battery Charge Relay harness is open or shorted
- Trailer Battery Charge Relay circuit poor electrical connection
- Faulty Body Control Module (BCM)
|How is the B130C LINCOLN code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|B130C LINCOLN code tech notesB130C:12 Load Shed Control Circuit Short To Battery
B130C:14 Load Shed Control Circuit Short To Ground or Open
|What is the cost to diagnose the B130C LINCOLN code
Labor: 1.0The cost to diagnose the B130C LINCOLN code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What are B130C LINCOLN code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
|What is B130C LINCOLN code meaning?The trailer battery charge relay coil receives voltage from the Battery Junction Box (BJB) fuse when the ignition is in RUN. The BJB fuse supplies voltage to the Trailer Battery Charge Relay switch side at all times. The Body Control Module (BCM) controls the ground side for the battery charge relay coil.
The BCM provides ground for the trailer battery charge relay when the ignition is in RUN and the BCM determines that the battery voltage is not low. When the trailer battery charge relay is energized, the voltage is routed to the trailer tow connector.
|Need more information with the B130C LINCOLN code?Need more information on how to fix the B130C LINCOLN code?
Get Access to Factory Service Manuals