B1302 FORD - Accessory Delay Relay Coil Circuit Failure
B1302 FORD Possible Causes
- Faulty Accessory Delay Relay
- Accessory Delay Relay harness is open or shorted
- Accessory Delay Relay circuit poor electrical connection
- Faulty Smart Junction Box (SJB)
How is the B1302 FORD code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
What is the cost to diagnose the B1302 FORD code
Labor: 1.0The cost to diagnose the B1302 FORD code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
B1302 FORD MeaningThe accessory delay relay receives voltage at all times from the Smart Junction Box (SJB). The SJB controls the coil side ground of the accessory delay relay and activates the accessory delay relay when the ignition switch is in the ON position. The accessory delay relay remains active for an additional 10 minutes when the ignition switch is in the OFF position or until the driver door is opened. The accessory delay relay provides voltage to the door lock switches, power windows and roof opening panel (if equipped).
More InformationNeed more information on how to fix the B1302 FORD code?
Get Access to Factory Service Manuals