B12B7 Code - Blend Door Actuator Slow Or Door Obstructed
|B12B7 code possible causes
- Stuck or damaged linkage or door
- Faulty Blend Door Actuator
- Blend Door Actuator harness is open or shorted
- Blend Door Actuator circuit poor electrical connection
- Electronic Manual Temperature Control (EMTC) Module
- Electronic Automatic Temperature Control (EATC) Module
|How is the B12B7 code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|What is the cost to diagnose the B12B7 code
Labor: 1.0The cost to diagnose the B12B7 code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What are B12B7 code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
|What is B12B7 code meaning?Under normal operation, to rotate the blend door actuator clockwise, the Electronic Manual Temperature Control (EMTC) Module or Electronic Automatic Temperature Control (EATC) Module supplies voltage to the blend door actuator motors through the door actuator feed A circuits and supplies ground through the door actuator feed B circuits. To rotate the blend door actuator counterclockwise, the EMTC module or EATC module reverses the voltage and ground circuits.
The blend door actuator feedback resistors are supplied a ground from the EMTC module or EATC module by the blend door actuator return circuits and a 5-volt reference voltage on the blend door actuator reference circuits. The EMTC module or EATC module reads the voltage on the blend door actuator feedback circuits to determine the blend door actuator position by the position of the actuator feedback resistor wiper arm.
|Need more information with the B12B7 code?Need more information on how to fix the B12B7 code?
Get Access to Factory Service Manuals