B12AD LINCOLN - Passenger Heated Seat Relay Drive Circuit Shorted To Battery Voltage
B12AD LINCOLN Possible Causes
- Faulty Heater Seat Relay
- Faulty Heater Mat
- Heater Mat harness is open or shorted
- Heater Mat circuit poor electrical connection
- Faulty Heating, Ventilation, and Air-Conditioning (HVAC) Module
How is the B12AD LINCOLN code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
What is the cost to diagnose the B12AD LINCOLN code
Labor: 1.0The cost to diagnose the B12AD LINCOLN code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
B12AD LINCOLN MeaningThe Heating, Ventilation, and Air-Conditioning (HVAC) Module contains the passenger heated seat control button and indicator. The heated seat system functions independently from the climate control system. A heated seat relay is located underneath the passenger seat cushion frame. There are 2 voltage supplies to the heated seat relay. Voltage is supplied from the Smart Junction Box (SJB) heated seat relay enable circuit to the passenger heated seat relay coil when the engine is running. The ground is supplied to the opposite side of the passenger relay coil by the HVAC module from the passenger heated seat relay drive circuit when the passenger heated seat switch button is pressed to energize the relay. This closes the relay contacts to supply battery voltage from the SJB circuit to the passenger heater mat circuit. The passenger heater mats are directly connected to ground circuit completing the electrical circuit to heat the seat.
More InformationNeed more information on how to fix the B12AD LINCOLN code?
Get Access to Factory Service Manuals