B1299 DODGE - Park Assist Sensor 12

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3  What does this mean?

B1299 DODGE Possible Causes

  • Faulty Park Assist Sensor 12
  • Park Assist Sensor 12 harness is open or shorted
  • Park Assist Sensor 12 circuit poor electrical connection
  • Faulty Park Assist Module

How do I fix code B1299 DODGE

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

B1299 DODGE Tech Notes

B1299-11 PTS SENSOR 12 CIRCUIT SHORT TO GROUND
B1299-12 PTS SENSOR 12 CIRCUIT SHORT TO BATTERY
B1299-25 PTS SENSOR 12 SIGNAL SHAPE / WAVEFORM FAILURE
B1299-92 PTS SENSOR 12 PERFORMANCE OR INCORRECT OPERATION

Cost of diagnosing the B1299 DODGE code

    Labor: 1.0

    The cost of diagnosing the B1299 DODGE code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

B1299 DODGE Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

B1299 DODGE Meaning

The Park Assist Sensors (PTS) are ultrasonic transceivers that are completely controlled by the Park Assist Module. The sensors transmit and receive ultrasonic signals. Each sensor has a voltage, signal, and return the circuit to the module. The sensors communicate with the Park Assist Module using a dedicated serial bus communication circuit. The Park Assist Module monitors the PTS Sensor when the vehicle in reverse and during the self-test while the vehicle is in drive between 18 km/h (11 mph) and 40 km/h (25 mph). The Park Assist Module sets the OBDII code when the Park Assist Sensor Signal circuit is not to factory specifications.
OBDII Code B1299 DODGE - Park Assist Sensor 12 - Engine-Codes.com

B1299 DODGE More Information

Need more information on how to fix the B1299 DODGE code?
Get Access to Factory Service Manuals

Related Information