B1299 CHRYSLER Code - Park Assist Sensor 12
|B1299 CHRYSLER code possible causes
- Faulty Park Assist Sensor 12
- Park Assist Sensor 12 harness is open or shorted
- Park Assist Sensor 12 circuit poor electrical connection
- Faulty Park Assist Module
|How is the B1299 CHRYSLER code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|B1299 CHRYSLER code tech notesB1299-11 PTS SENSOR 12 CIRCUIT SHORT TO GROUND
B1299-12 PTS SENSOR 12 CIRCUIT SHORT TO BATTERY
B1299-25 PTS SENSOR 12 SIGNAL SHAPE / WAVEFORM FAILURE
B1299-92 PTS SENSOR 12 PERFORMANCE OR INCORRECT OPERATION
|What is the cost to diagnose the B1299 CHRYSLER code
Labor: 1.0The cost to diagnose the B1299 CHRYSLER code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What are B1299 CHRYSLER code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
|What is B1299 CHRYSLER code meaning?The Park Assist Sensors (PTS) are ultrasonic transceivers that are completely controlled by the Park Assist Module. The sensors transmit and receive ultrasonic signals. Each sensor has a voltage, signal, and return the circuit to the module. The sensors communicate with the Park Assist Module using a dedicated serial bus communication circuit. The Park Assist Module monitors the PTS Sensor when the vehicle in reverse and during the self-test while the vehicle is in drive between 18 km/h (11 mph) and 40 km/h (25 mph). The Park Assist Module sets the OBDII code when the Park Assist Sensor Signal circuit is not to factory specifications.
|Need more information with the B1299 CHRYSLER code?Need more information on how to fix the B1299 CHRYSLER code?
Get Access to Factory Service Manuals