B127A - Auxiliary Video Input
B127A Possible Causes
- Faulty Auxiliary Input Assembly
- Auxiliary Input Assembly harness is open or shorted
- Auxiliary Input Assembly circuit poor electrical connection
How do I fix code B127A?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the B127A code
Labor: 1.0The cost of diagnosing the B127A code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
B127A MeaningThe rear seat entertainment system has an auxiliary input assembly that contains a USB port, an SD card reader, RCA type audio/video jacks, and a wired headphone jack with volume control. Refer to the Owners Manual for information on compatible devices and supported media types/formats.
The USB port and SD card reader slot interface with a hub device, internal to the assembly. The assembly receives fused battery voltage and ground from the harness to power the internal hub device as well as providing additional amperage to power USB devices.
The internal hub device interfaces directly with the disc player via a standard USB cable. A Mini type USB connector is used to connect the cable at the disc player and the auxiliary input assembly. Mini type USB male to female connections are used for connecting USB cables together where an in-line connection is required. An in-line cable connection is typically found between the console and I/P harness.
The USB port allows connectivity to the rear seat entertainment system from portable media players or a USB storage device (memory stick/ flash drive). The rear seat entertainment uses the SD card reader as a mass storage device, similar to a USB storage device.
Once a supported device is connected to the USB port or SD card reader, the device may be sourced to one or both of the rear displays using the remote control.
B127A More InformationNeed more information on how to fix the B127A code?
Get Access to Factory Service Manuals