B1264 CADILLAC Possible Causes
- Faulty Floor Door Actuator
- Floor Door Actuator harness is open or shorted
- Floor Door Actuator circuit poor electrical connection
- Faulty Electronic Automatic Temperature Control (EATC) Module
How do I fix code B1264 CADILLAC
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the B1264 CADILLAC code
Labor: 1.0The cost of diagnosing the B1264 CADILLAC code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
B1264 CADILLAC Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B1264 CADILLAC MeaningUnder normal operation, the panel/defrost and floor door actuator motors are supplied voltage or ground through the circuit, depending on desired actuator rotation, by the Electronic Automatic Temperature Control (EATC) module. The EATC module then supplies the appropriate voltage or ground to the other side of the actuator motor. The panel/defrost and floor door actuator feedback resistors are supplied a ground and a 5-volt reference voltage from the EATC module. The EATC module reads the voltage on the circuit to determine the actuator position by the position of the actuator feedback resistor wiper arm.
B1264 CADILLAC More InformationNeed more information on how to fix the B1264 CADILLAC code?
Get Access to Factory Service Manuals