B1222 Dodge Code - Right Heated Seat LO Indicator Control Circuit High
Quick Answer
The B1222 diagnostic trouble code (DTC) for Dodge vehicles indicates a problem with the right heated seat LO indicator control circuit being too high. Common causes include Faulty wiring or connections in the right heated seat indicator circuit, Malfunctioning heated seat control module, Blown fuse related to the heated seat system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1222 Dodge indicates Right Heated Seat LO Indicator Control Circuit High.
- Common causes
- Common causes include Faulty wiring or connections in the right heated seat indicator circuit, Malfunctioning heated seat control module, Blown fuse related to the heated seat system.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1222 Dodge Description
The B1222 diagnostic trouble code (DTC) for Dodge vehicles indicates a problem with the right heated seat LO indicator control circuit being too high. This code is specifically related to the control circuit that manages the low setting for the right heated seat indicator. When this code is triggered, it means that the powertrain control module (PCM) has detected a voltage signal that is outside of the expected range for this circuit.
Common Causes of B1222 Dodge
- Faulty wiring or connections in the right heated seat indicator circuit.
- Malfunctioning heated seat control module.
- Blown fuse related to the heated seat system.
- Defective right heated seat switch.
- Issues with the PCM or other control modules related to the heated seats.
Symptoms of B1222 Dodge
- Right heated seat indicator not illuminating on the low setting.
- Inability to adjust the right heated seat to the low setting.
- Right heated seat not producing heat on the low setting.
- Other indicators or controls related to the heated seats may also be affected.
How to Fix B1222 Dodge
- Begin by inspecting the wiring and connections in the right heated seat indicator circuit for any signs of damage or corrosion. Repair or replace any faulty wiring as needed.
- Check the heated seat control module for proper operation and replace it if necessary.
- Verify the integrity of the fuse related to the heated seat system and replace it if blown.
- Test the right heated seat switch for functionality and replace it if it is found to be defective.
- Clear the DTC from the PCM memory using a diagnostic scan tool after completing the repairs and test the right heated seat system to ensure proper operation.
Cost to Fix B1222 Dodge
The typical repair costs for addressing the B1222 DTC on a Dodge vehicle can vary depending on the specific cause of the issue. In general, parts for this repair could range from $50 to $200, while labor costs may add an additional $100 to $300. Overall, the total cost for resolving this problem could fall between $150 and $500. It's important to note that these estimates are rough averages and actual costs may differ based on factors such as location, vehicle make and model, and the specific repair shop. It's recommended to consult with a qualified mechanic or dealership for a more accurate cost estimate.
Need more information about the B1222 Dodge code?
Need more information on how to fix the B1222 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1222 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1222 Dodge Code
1. What does the OBDII code B1222 mean on a Dodge vehicle?
B1222 indicates an issue with the "Right Heated Seat LO Indicator Control Circuit High," meaning the voltage in the circuit is higher than expected.
2. What are the symptoms of the B1222 code in a Dodge?
Common symptoms include the right heated seat low indicator not functioning, the seat heater not operating properly, or the indicator light staying on or off.
3. What causes the B1222 code to appear?
The code can be caused by a malfunctioning heated seat switch, a wiring short or open in the circuit, a defective seat control module, or poor electrical connections.
4. Can the B1222 code affect seat heating performance?
Yes, this code can result in the right heated seat not working correctly or at all, especially on the low heat setting.
5. How is the B1222 code diagnosed?
A mechanic will use a scan tool to verify the code, inspect the wiring and connectors for damage, and test the heated seat switch and seat control module for faults.
6. Can I drive my Dodge with the B1222 code active?
Yes, you can drive your vehicle, as this code doesn't affect drivability. However, the heated seat functionality may be compromised.
7. How do you fix the B1222 code?
Repairs typically involve fixing or replacing damaged wiring, repairing poor connections, replacing the heated seat switch, or replacing a faulty seat control module.
8. How much does it cost to fix the B1222 code on a Dodge?
Repair costs vary but generally range from $100 to $300, depending on whether it involves simple wiring repairs or component replacement.
9. Can I reset the B1222 code without fixing the problem?
You can clear the code with a scan tool, but it will likely return unless the underlying issue is resolved.
10. What tools are needed to diagnose the B1222 code?
Tools include a diagnostic scan tool, a multimeter for testing voltage and continuity, and wiring diagrams specific to your Dodge model.
Discuss the causes and fixes for B1222 Dodge OBDII Code
Code B1222 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.