B1202 Infiniti Code - Diagnosis Sensor Unit
Quick Answer
The B1202 code in Infiniti vehicles refers to an issue with the Diagnosis Sensor Unit. Common causes include Faulty Sensor Unit: The most common cause of the B1202 code is a malfunctioning Diagnosis Sensor Unit, Wiring Issues: Damaged or corroded wiring connections can disrupt the communication between the sensor unit and other components, Software Glitch: A software glitch or programming error in the vehicle's system can trigger this code. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1202 Infiniti indicates Diagnosis Sensor Unit.
- Common causes
- Common causes include Faulty Sensor Unit: The most common cause of the B1202 code is a malfunctioning Diagnosis Sensor Unit, Wiring Issues: Damaged or corroded wiring connections can disrupt the communication between the sensor unit and other components, Software Glitch: A software glitch or programming error in the vehicle's system can trigger this code.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1202 Infiniti Description
The B1202 code in Infiniti vehicles refers to an issue with the Diagnosis Sensor Unit. This unit is responsible for monitoring various systems in the vehicle and detecting any malfunctions or abnormalities. When this code is triggered, it indicates that there is a problem with the sensor unit itself or its communication with other components in the vehicle.
Common Causes of B1202 Infiniti
- Faulty Sensor Unit: The most common cause of the B1202 code is a malfunctioning Diagnosis Sensor Unit.
- Wiring Issues: Damaged or corroded wiring connections can disrupt the communication between the sensor unit and other components.
- Software Glitch: A software glitch or programming error in the vehicle's system can trigger this code.
- Electrical Problems: Issues with the vehicle's electrical system, such as a weak battery or alternator, can also lead to the B1202 code.
- Environmental Factors: Extreme temperatures or moisture exposure can affect the sensor unit's performance and trigger this code.
Symptoms of B1202 Infiniti
- Check Engine Light: The most common symptom associated with the B1202 code is the illumination of the check engine light on the dashboard.
- Erratic Behavior: The vehicle may exhibit erratic behavior, such as sudden jerking or stalling.
- Decreased Performance: The engine may experience a decrease in performance, such as reduced power or acceleration.
- Transmission Issues: The transmission may shift roughly or fail to engage properly.
- ABS or Traction Control Warning: The ABS or traction control warning lights may also illuminate due to the sensor unit's malfunction.
How to Fix B1202 Infiniti
- Diagnostic Scan: Begin by using a diagnostic scan tool to retrieve the specific error codes and identify the underlying issue.
- Inspect Wiring: Check the wiring connections associated with the Diagnosis Sensor Unit for any damage or corrosion. Repair or replace as needed.
- Test Sensor Unit: Test the Diagnosis Sensor Unit to determine if it is functioning correctly. Replace the unit if it is found to be faulty.
- Software Update: If a software glitch is suspected, update the vehicle's software to the latest version to address any programming errors.
- Electrical Check: Perform a thorough check of the vehicle's electrical system, including the battery and alternator, to ensure they are functioning properly and providing adequate power to the sensor unit.
Cost to Fix B1202 Infiniti
The cost of repairing the B1202 code in an Infiniti vehicle can vary depending on the specific cause of the issue and the extent of the repairs needed. On average, the repair costs for this issue can range from $200 to $500, including parts and labor. However, it is important to note that the actual cost may be higher or lower based on factors such as the location of the repair shop, the vehicle's make and model, and the type of engine. Additionally, diagnostic time and labor rates at auto repair shops can vary, with hourly rates typically ranging from $80 to $150. It is recommended to obtain quotes from multiple repair shops to get a more accurate estimate for addressing the B1202 code in an Infiniti vehicle.
Need more information about the B1202 Infiniti code?
Need more information on how to fix the B1202 Infiniti code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1202 Infiniti code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1202 Infiniti Code
What does the OBDII code B1202 mean for my Infiniti?
The B1202 code indicates a problem with the Diagnosis Sensor Unit, which is responsible for monitoring the vehicle's airbag system.
What are the common symptoms associated with the B1202 code?
Common symptoms include the airbag warning light being illuminated on the dashboard, potential issues with airbag deployment, and sometimes associated fault codes.
What might cause the B1202 code to trigger?
Causes can include a faulty Diagnosis Sensor Unit, wiring issues, poor connections, or a malfunction in the airbag system.
Can I drive my Infiniti safely with the B1202 code?
It is not recommended to drive the vehicle with this code active, as it may indicate that the airbag system is not functioning properly, which can compromise safety.
How can I diagnose the B1202 code?
To diagnose the B1202 code, use an OBDII scanner to confirm the code and check for additional related codes, inspect wiring and connectors, and test the Diagnosis Sensor Unit.
What are some repair tips for fixing the B1202 code?
Inspect and repair any damaged wiring or connectors, replace the Diagnosis Sensor Unit if faulty, and clear the codes after repairs to see if the problem persists.
Is it necessary to reset the airbag system after fixing the B1202 code?
Yes, after repairs, it is important to reset the airbag system using an OBDII scanner to ensure the system is functioning correctly and to clear the warning light.
Could a dead battery cause the B1202 code to appear?
Yes, a dead or weak battery can lead to electrical issues that may trigger the B1202 code, so it’s advisable to check the battery condition.
Should I consult a professional mechanic for the B1202 code?
If you’re not experienced with automotive electrical systems and airbag components, it’s best to consult a professional mechanic for proper diagnosis and repair.
Discuss the causes and fixes for B1202 Infiniti OBDII Code
Code B1202 Infiniti comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.