B11D6 FORD Code - Driver Display Alert LED
|B11D6 FORD code possible causes
- Faulty Driver Display Alert LED
- Driver Display Alert LED harness is open or shorted
- Driver Display Alert LED circuit poor electrical connection
|How is the B11D6 FORD code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|B11D6 FORD code tech notesB11D6:11 Driver Display Alert LED: Circuit Short To Ground
B11D6:15 Driver Display Alert LED: Circuit Short To Battery or open
|What is the cost to diagnose the B11D6 FORD code
Labor: 1.0The cost to diagnose the B11D6 FORD code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What are B11D6 FORD code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
|What is B11D6 FORD code meaning?On each ignition cycle, the Side Obstacle Detection Control Module - Right (SOD-R) and Side Obstacle Detection Control Module - Left (SOD-L) run a self diagnostic check during which the exterior mirror Blind Spot Information System (BLIS™)/Cross Traffic Alert (CTA) LEDs illuminate for 3 seconds then turn off indicating the system is operational. If a Diagnostic Trouble Code (DTC) fault is present, a system fault message is observed in the Instrument Panel Cluster (IPC) message center. The OBDII code sets when the SOD-R or SOD-L detects an open, short to ground or battery voltage on the exterior mirror BLIS™ /CTA LED supply circuit.
|Need more information with the B11D6 FORD code?Need more information on how to fix the B11D6 FORD code?
Get Access to Factory Service Manuals