Engine-Codes - Dodge - B11C8 Dodge

B11C8 Dodge Code - Right Temperature Door Circuit

- Code Popularity: 2,731 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 3/3
Table of contents

|What are the Possible Causes of the Code B11C8 Dodge?

  • Passenger Blend Door Binding
  • Faulty Passenger Blend Door Actuator
  • Passenger Blend Door Actuator harness is open or shorted
  • Passenger Blend Door Actuator circuit poor electrical connection
  • Faulty A/C Heater Module

|How to Fix the B11C8 Dodge Code?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|Code B11C8 Dodge Tech Notes

B11C8-11-RIGHT TEMPERATURE DOOR CONTROL - CIRCUIT SHORT TO GROUND
B11C8-12-RIGHT TEMPERATURE DOOR CONTROL - CIRCUIT SHORT TO BATTERY
B11C8-13-RIGHT TEMPERATURE DOOR CONTROL - CIRCUIT OPEN
B11C8-92-RIGHT TEMPERATURE DOOR CONTROL - PERFORMANCE OR INCORRECT OPERATION

|What is the Cost to Diagnose the Code B11C8 Dodge?

Labor: 1.0

The cost to diagnose the B11C8 Dodge code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

Does your car have Safety Recalls? → Check here

|What are Code B11C8 Dodge Possible Symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|What Does the B11C8 Dodge Code Mean?

After the initial installation of the A/C Heater Module, the controller is calibrated to each individual blend/mode door actuator. These calibrations are stored as in the number of pulses it takes to move the door from one stop to another. The A/C Heater Module drives the Door Actuators by the use of Door Driver circuit and a Common Door Driver circuit and monitors all door actuator pulses to detect door movement in both directions. Most of the door actuators share a common door driver circuit but each door actuator has its own unique driver circuit. Due to shared circuitry, similar Diagnostic Trouble Codes (DTCs) can set at the same time for multiple actuators depending upon the type of circuit malfunction, its location, and the direction the actuator is moving when the malfunction is present. For further information

Right Temperature Door Circuit

|Need more Information on the B11C8 Dodge Code?

Need more information on how to fix the B11C8 Dodge code? Get Access to Factory Service Manuals

|Need Help with the B11C8 Dodge Code?

Get the B11C8 Dodge code diagnosed by a professional: Find a repair shop in your area